16. SETTING THE NUMBER
In this setup, you can select digits of printed number, the Repeat Times of number, and type of Number Reset .
Example: Change the Number Digit to 4 digits and the Repeat Times to 2 times, and the Reset to 0.
1 Press the [SELECT] button and position the "
"next to the "NUMBER" mark. At that moment, the flashing digit indicates "Number Digit".
(The flashing means it can be changed.)
Number | Repeat | Reset |
Digit | Times | Options |
Change the "Number Digit".
The Number Digit can be set to 1 to 8. In case of the example, press the [CHANGE] button to set at "4". And then press the [SET] button.
At that moment, the flashing changes from the "Number Digit" to "Repeat Times".
NUMBER | NUMBER | ||
|
|
|
|
SELECT
CHANGE 
SET
SELECT
CHANGE 
SET
Print Example: 6 Digits of Number 
123456 JAN 31 '03
4 Digits of Number 
1234 JAN 31 '03
2 Change the "Repeat Times".
The Repeat Times can be set to 0 to 9. In case of the example, press the [CHANGE] button to set at "2". And then press the [SET] button.
At that moment, the flashing changes from "Repeat Times" to "Reset Options".
SELECT
NUMBER
CHANGE 
SET
Print Example: 0 time repeat
Note: If the recorder is set to repeat 0 times, the number will not advance.
2 times repeat
(1st time) 123456 JAN 31 '03 (2nd time) 123456 JAN 31 '03 (3rd time) 123456 JAN 31 '03 (4th time) 123456 JAN 31 '03
(5th time) 123456 JAN 31 '03
(1st time) 123456 JAN 31 '03 (2nd time) 123456 JAN 31 '03 (3rd time) 123457 JAN 31 '03 (4th time) 123457 JAN 31 '03
(5th time) 123458 JAN 31 '03
27 | 29 |
31