Acroprint ES900 user manual Setting the Time Table Program, Set the Day of the week

18. SETTING THE TIME TABLE PROGRAM

The time table program function allows I Mark© "*" printing (Irregular registration Mark), an External Time Signal and a Built-in Buzzer. These functions can be programmed for each day of the week and each time period. Use the I Mark "*" (asterik prints) to indicate punches earlier or later than scheduled.

Example 1: The time table program is explained using the following example.

0:00 9:00 17:30 0:00

Monday

to Friday

I Mark "*"

OFF

I Mark "* " ON

I Mark "*"

OFF

The following is time table based on the case above.

Program No.	Day of the week	Time	I Mark "*"
01	Mon. - Fri.	9:00	ON
02	Mon. - Fri.	17:30	OFF

•I Mark "*" is not printed for the time period with no program setting.

•Up to 48 programs can be set (Program No. 1 through No. 48).

JAN 31 8:30

Print example:I Mark

JAN 31 10:00 *

1 Press the [SELECT] button and position the " " over the "Time table program" mark.

At that moment, the flashing digit indicates "Program No.".

(The flashing means it can be changed.)

2 Setting program No. 1

(1) Set the "Day of the week".

Press the [SET] button. At that moment, the flashing changes from the "Program No." to the "Day of the week".

In case of example, press the

Program No.	Action		[CHANGE] button to set at "8". And
			then press the [SET] button. At that
			moment, the flashing changes from the
			"Day of the week" to the "Action".
Day of the week	TIME	TABLE
	PROGRAM

SELECT

CHANGE SET

	Day of the week		Day of the week
1.	Monday only	6.	Saturday only
2.	Tuesday only	7.	Sunday only
3.	Wednesday only	8.	Monday to Friday
4.	Thursday only	9.	Monday to Saturday
5.	Friday only	10.	Every day

32

		TIME TABLE
		PROGRAM
SELECT	CHANGE		SET

30

34