20. SETTING THE SLAVE CLOCK
In this setup, you can select the Slave Clock.
Note: For this feature to be functional, the optional board must be installed in the Time
Recorder.
Clock Options
0.Disabled
1.Slave Clock
2.N/A
Signal Options (for Slave Clock)
30.
60.
59.
Setting the Slave Clock
Example: Set the Slave Clock and 60-second reversal.
1 Press the [SELECT] button and position the " "up the "SLAVE CLOCK" mark. At that moment, the flashing digit indicates "Clock Options".
(The flashing means it can be changed.)
Clock Options
| SLAVE CLOCK | |||
SELECT |
| CHANGE |
| SET |
Set the "Clock Options".
In case of the example, press the [CHANGE] button to set at "1".
And then press the [SET] button.
At that moment, the flashing changes from the "Clock Options" to "Signal Options".
Signal Options
| SLAVE CLOCK | |||
SELECT |
| CHANGE |
| SET |
40
2 Set the "Signal Options".
In case of the example, press the [CHANGE] button to set at "60".
And then press the [SET] button.
| SLAVE CLOCK | |||
SELECT |
| CHANGE |
| SET |
3 After you finish setting the slave clock, press the [SET] button once again.
SU MO TU WE TH FR SA
Now the slave clock setting has been completed. Replace the cover and lock.
Important: Printing will not occur unless Step 3 is completed.
40
42