4. OPTIONAL FUNCTIONS
The following optional functions are available by adding an optional board:
External Time Signal for Bell,
External Time Signal and Built-in Buzzer
External time signal and
Refer to the "18. SETTING THE TIME TABLE PROGRAM," and the "19. SETTING THE EXTERNAL TIME SIGNAL /
Connection Specifications for External time signal contact
•Contact output: dry contact
•Contact capacity: 5A, 30VDC (Resistive)
The Slave Clock
The Slave Clock is a function to synchronize the time of the time recorder and the master clock. This function operates by choosing Slave Clock by Slave Clock setup.
Refer to the "20. SETTING THE SLAVE CLOCK."
Input signal Specifications.
•
Since the
•
Since the
•
From the 59th minute through the 49th minute the pulse is transmitted with line AB positive with respect to PC.
From the 50th minute to the 59th minute the pulse is transmitted with line AB negative with respect to PC.
During the 59th minute, the continuous pulse of 20 times is transmitted with line AB negative with respect to PC.
As this method monitors from 5 minutes before several preset hours to input
Pulse Specification | Input sensitivity |
Pulse width | 0.1 second or more |
Voltage | 6 - 32V |
5
7