Acroprint ES900 Setting the Password, Change the first two digits, Change the last two digits

Page 43

21. SETTING THE PASSWORD

When the password is set, you are asked to enter it. If the password you entered does not coincide with the setting, you cannot change the setting values.

You may select any 4-digit number from 0001 to 9998 as your password. Note : Numbers "0000" and "9999" are not valid passwords.

All settings must be reset if you forget the password. Refer to the "23. RESETTING".

Example: Set the password "1234".

1 Press the [SELECT] button and position the "" over the "PASSWORD" mark. At the moment, the first two digits flash. (The flashing means it can be changed.)

PASSWORD

SELECT

CHANGE

 

SET

Change the first two digits.

In case of the example, press the

[CHANGE] button to set at "12". And

then press the [SET] button.

PASSWORD

SELECT

CHANGE

 

SET

At that moment, the flashing changes

to the last two digits.

2 Change the last two digits.

In case of the example, press the [CHANGE] button to set at "34". And then press the [SET] button.

PASSWORD

SELECT

CHANGE

 

SET

3 After you finish registering the password, press the [SET] button once again.

SU MO TU WE TH FR SA

Now the password registering has been completed. Replace the cover and lock.

Important: Printing will not occur unless Step 3 is completed.

41

41

 

 

43

Image 43
Contents ES900 ALL Rights Reserved Acroprint Time Recorder Table of Contents Daily Care Introduction & FeaturesPackage Contents Before Using Your RecorderRemove the Protection PAD Quick Easy SetupOptional Functions External Time Signal and Built-in BuzzerConnection Specifications for External time signal contact Input signal SpecificationsFunction of 3 control buttons HOW to Program the Time RecorderChange the Minute Setting the TimeChange the Hour Change the Month Setting the DateChange the Date Change the YearSetting the 12/24 Hour Format Setting the Print Order Change the Year Digit Setting Year & Minute FormatChange the Type of Minute JAN 01 Change the Leading ZeroChange the Comment Options Setting PRE-PROGRAMMED CommentsBOSTON, MA Setting the Customized CommentsSet the Character Code Setting the 1st comment lineSetting the 2nd comment line Setting the 3rd comment line HOW to Correct Customized Comments Change the Print Position Setting the Print Position of Customized CommentsConfirming the 1st comment line Confirming and Changing the Customized CommentsConfirming the 3rd comment line Changing the Customized CommentsChange the Language Setting the LanguageChange the Print Direction Setting the Print MethodChange the Print Activation SU MO TU WE TH FR SA Daylight Saving Time function Setting Daylight Saving TimeSet the starting date Set the ending date Deleting the Daylight Saving Time settings Print Example 0 time repeat Setting the NumberChange the Number Digit Change the Repeat TimesChange the Reset Options Set the Initial Number Setting the Initial NumberSet the Day of the week Setting the Time Table ProgramSet the Hour Set the ActionSet the Minute Monday To Saturday Setting program No Set the Day of the week Buzz EXT. *OFF Setting program No Deleting the Time Table Program settings Confirming the Time Table Program settingsChange the Built-in Buzzer Change the Ext. SignalRecorder Setting the Slave ClockSetting the Slave Clock Set the Signal OptionsChange the first two digits Setting the PasswordChange the last two digits Set the first two digits How to change settings when the Password is setSet the last two digits Canceling the Password RE-SETTING Wall Mounting Replacing the Ribbon Cassette Print head Ribbon mask Turn the knob of the cassette Dots Character Code for AlphanumericCode Max Code CharacterLarge Character Small Character French EnglishSpanish GermanInstalling the Optional Ni-Cd Battery Connecting the Master Clock Connecting the Optional FunctionsPlease consult your local electrician Connecting the External Time SignalClamp Attaching the Wire ClampError No. appears TROUBLE-SHOOTINGSpecifications 06-0316-000 Rev. a