Acroprint ES900 user manual Change the Built-in Buzzer, Change the Ext. Signal

19. SETTING THE EXTERNAL TIME SIGNAL / BUILT-IN BUZZER

With the optional board installed, the durations of External Time Signal and Built-in Buzzer can be set from 1 to 30 seconds.

Example: Change the External Time Signal to 30 seconds and the Built-in Buzzer to 10 seconds.

1 Press the [SELECT] button and position the " " over the "EXT. SIGNAL / BUILT-IN BUZZ." mark.

At that moment, the flashing digit indicates the "Ext. Signal".

(The flashing means it can be changed.)

3 Change the "Built-in Buzzer".

In case of the example, press the [CHANGE] button to set at "10". And then press the [SET] button.

Ext.Built-in

SignalBuzzer

	EXT. SIGNAL
	BUILT-IN BUZZ.
SELECT	CHANGE	SET

	EXT. SIGNAL
	BUILT-IN BUZZ.
SELECT	CHANGE	SET

2 Change the "Ext. Signal".

In case of the example, press the [CHANGE] button to set at "30". And then press the [SET] button.

4 After you finish setting the external time signal / built-in buzzer, press the [SET] button once again.

SU MO TU WE TH FR SA

	EXT. SIGNAL
	BUILT-IN BUZZ.
SELECT	CHANGE	SET

At that moment, the flashing changes from the "Ext. Signal" to the "Built-in Buzzer".

Now the external time signal / built-in buzzer setting has been completed. Replace the cover and lock.

Important: Printing will not occur unless Step 4 is completed.

		EXT. SIGNAL
		BUILT-IN BUZZ.
	SELECT	CHANGE	SET
37		39

41