System 75 and DEFINITY G1
Initial Implementation
The information in this section is intended to help you and the System 75 or DEFINITY G1 Switch Administrator work together to administer the switch and meet the specific requirements on the switch for your AUDIX Voice Power system. To complete these tasks, you will need to access information regarding switch administration, and use the accompanying forms for the switch.
AUDIX Voice Power is designed to operate with a System 75 or DEFINITY G1 Private Branch Exchange (PBX) using analog lines. TO integrate the PBX with AUDIX Voice Power, the PBX also requires a connection from a
Verifying Software Release
Before beginning the switch administration, verify the system software release.
■If the PBX is a System 75 with release R1V3 software, verify that software vintage 17091 (Issue 1.7) or greater has been installed.
■If the PBX is a DEFINITY G1, verify that software Issue 4.0 or greater has been installed.
If you have an R1V3 or G1 and you do not have the proper software, DO NOT proceed with the switch administration. Instead ask your AT&T Representative to contact the AT&T Sales and Technical Response Center at