AT&T 2.1.1 manual Creating Hunt Groups

iSystem 75 and DEFINlTY G1 Initial Implementation

Creating Hunt Groups

To create a hunt group, use the add hunt-groupcommand and:

1.Assign a group number between 1-100.

2.Assign a group extension. This extension must be a valid extension in the switch dial plan.

3.Enter the extensions of the analog channels that you are assigning as members of the hunt group on Page 2 of the hunt group form.

(See Figure 3-7.)

NOTE

When you enter the extension, the name is filled in automatically.

Page 1 of 5

HUNT GROUP

Group Number: 1

Group Name: auto attendant

Security Code:

Queue? y

Group Extension: 30000 Group Type: ucd

Coverage Path:	COR: 1
Message Center: none	ACD? n
Night Service Destination:

Queue Length: 2
Calls Warning Threshold:	Calls Warning Port:
Time Warning Threshold:	Time Warning Port:
First Announcement Extension:	Announcement Delay (sec):

Figure 3-6. Hunt Group Form (Page 1)

3-13