Ricoh PJ X3241N Turning the power on and off,  Connect the power cord,  Turn the power on

Operations

Turning the power on and off

Turn the power on

1Remove the lens cap.

Be sure to remove the lens cap when the power is turned on. If the cap is left on the projector, it could become deformed due to heat.

2 Press the ON/STANDBY button.

The power turns on with a beep sound (if the beep sound is set to [On]), and the ON/STANDBY indicator flashes orange, and then flashes green. When [Network standby] is set to [On], the ON/STANDBY indicator flashes green. After a moment, the start-up screen appears.

CAUTION

•Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyesight.

•Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.

•Do not place your hands, face, or other objects near the air exhaust, the lamp cover or the bottom of the unit. Doing so could result in injury and/or damage the object.

Notes

•The start-up screen will disappear after a moment. You can also configure the system to prevent the start-up screen from appearing. To do this, use the Display setting menu p.39 .

•The first time you use the projector after purchase, after the start-up screen disappears, the start menu is displayed p.28 .

•You can disable the beep sound in the Default setting 1 menu p.42 .

•When [Key lock] is [On], the operation buttons of the projector do not work p.43 .

•When [Password] is [On], enter password then the start-up screen is displayed after the Password entry screen disappears p.35 .

•Do not touch the lens directly with your hand.

If fingerprints or stains are left on the projection lens surface, they may interfere with the projector’s ability to project images on the screen.

26