Ricoh PJ WX3231N How to set password from Off to On, How to operate when password is On

Page 35

How to set password (from [Off] to [On])

1Select [Password] in the Default setting 2 menu and press the or button.

2Select [Password setting] and press the or button.

3Select [On].

4Select [OK] and press the button.

The password entry screen is displayed.

5Enter the password using the numeric keys of the remote control.

6The password setting will be set as [On].

How to operate when password is [On]

1Turn on the power.

2The lamp lights and the password entry screen appears.

3Enter the password using the numeric keys of the remote control.

If the entered password is correct, the start-up screen appears and the projector goes into normal operation. If the password is incorrect, a message will appear prompting you to re-enter the password, and the password entry screen is displayed again. If you enter an incorrect password more than 5 times, the projector will automatically power off and enter standby mode.

Note

•When the password setting is [On], the password function will be enabled only when the projector is restarted after the power cord has been unplugged.

The password that you set will not be enabled when restarting from standby mode without unplugging the power cord.

How to set password (from [On] to [Off])

1Select [Password] in the Default setting 2 menu and press the or button.

The password entry screen is displayed.

2Enter the password using the numeric keys of the remote control.

3Select [Password setting] and press the or button.

4Select [OFF].

5Select [OK] and press the button.

Operations

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents
Data Projector USA only Safety PrecautionsBefore Using Ventilation Power SourcesSource of Light Water and Moisture CleaningPower Cord Protection HeatImportant Safety Instructions If glass components AccessoriesDamage Requiring Service Sales representative for Repair serviceDo not use the product in a closed installation Location Replacement PartsSafety Check Avoid Volatile Liquid Place and Manner of InstallationMoisture Condensation Following information is only for EU-member states Important Precautions LCD PanelCopyrights DisposalNotational Conventions Used in This Manual Other Information TrademarksContents Others MaintenanceNetwork/USB memory Checking the package contents Preparations Names of each part on the main unitRemote Control Names of each part on the control panel and remote controlButtons. Either is usable. p.20 p.65 91011 Names of the terminals on the rear panel Operating the remote Control Preparing and using the remote control Loading dry-cell batteries into the remote control Operating a computer Connecting a computerPlacement Styles PlacementScreen As seen from above PlacementProjection Distance and Size PJ X3241NPJ WX3231N Screen As seen from above As seen from the side Before connection ConnectionPreparations Remove the lens cap Turning the power on and off Connect the power cord  Turn the power onReplace the lens cap  Turn the power offPrecautions Press the ON/STANDBY button againPress the Input button Turn on the powerBasic operations Activate the connected deviceTo fine adjust the angle, twist the foot adjuster Adjust projector placement angleAdjust the screen size and focus Adjust the volume with the buttonsLCD Panels Basic operations Adjusting Keystone distortion Manually Using handy features  Using auto setting For computer input only Press the remote control’s Auto SET button Resizing image Using handy featuresPress the remote control’s Resize button To zoom out, press the remote control’s Resize Button Changing screen size  Changing picture modePress the remote control’s Screen Size button  Cutting off the picture and sound temporarily Mute Freezing the image Freeze  Setting the password How to change passwordPress the remote control’s Freeze button How to set password from On to Off How to set password from Off to OnHow to operate when password is On  Setup using the Setting display Using the menusContrast  The image adjustment menuFrequency Using the menus The display setting menu Up/down shift Blackboard modePrecaution Detailed description Screen sizeLogo confirmation Reset logoDisplay style Input select menu Computer  The default setting menuDetailed description Auto input search Network input detectionVoice guide Power onLamp power Detailed description Fan modeClosed Caption Remote control code setting for remote controlKey lock  Displaying Information Status display Functions Before connecting via a network Connection using the Network Projector Windows Vista or  Connection using the Network Utility Infrastructure communication mode  Communication mode Caution when using the wireless LAN functions  Ad hoc communication modePlug in the USB device How to use the USB terminal Connecting USB device  Disconnecting USB device The USB terminal  USB memory devices Backing up data  Supported filesControl setting Slideshow setup Status display  Projector settings Be sure to read this subsectionLAN  Setting up the Network Projector/Network UtilityNumber only Character entry modeItems using characters, numbers, and symbols  Character entry Details on individual items Setting initialization  Security for wireless LAN settings Network authenticationNetwork key When you have set Encryption to WEP When you have set Encryption to TKIP/AES Wired LAN settings  Computer settings PJLink  The control setting menu Detailed description Projector nameWireless network  Setting slideshow optionsMovie Image  Details on individual items Still ImageCommon Checking the projector status Status display Turn the projector power on Switch the input to Network Using the Network Projector Setting up the projector  Setting up the computer Application Types and Major Functions Installing the applications How to install  System Requirements How to uninstall Click the Advanced button Using the Network UtilitySelect Transmission mode Launch the Network Utility software applicationClick the button Select the projector to be transmittedClick the Browse button, and select the file to send Using the Network UtilityClick the Jpeg File icon Click Movie File icon Click the Browse button and select the file to send Mute Select the projector to transmit toPlay the video file via the Control window Click the Multiscreen icon Layout.Arrange the virtual display Example Multiscreen Usage ExamplesUSB memory Using the Network Utility Click the Tool button Wireless LAN Settings Utility dialog box appears Easy Connect utility Launch the Network Utility software applicationUnplug the USB memory device from the computer Copying the computer settings to the projectorUnplug the USB memory device Modifying the computer settings using the projector settingsRegistering profile automatically Advanced settingSwitching settings automatically at start-up WEB browser Operating the projector Click the Remote Control buttonClick the Remote Control window’s buttons To quit, click the button on the Remote Control window Playing a slide show from a thumbnail list Symbols in the thumbnail listChanging slides Plug a USB memory deviceSearching for a target file For Jpeg files Displaying slidesFast-forwarding and rewinding video images For Mpeg files Displaying video Converting an image file How to use the Jpeg Conversion Tool Launching the Jpeg Conversion Tool Conversion Method field, select Converting PPT file How to use the Jpeg Conversion Tool Converting files created with Microsoft PowerPoint Playing a slide show from a thumbnail list  Making a presentation with converted Jpeg filesJpeg file has been created Conversion Method field, select Creating screen capture How to use the Projector Configuration Tool Setting up the projector using a Web browserSelect items from the menu on the left Setting up the projector using a Web browserStatus display  Details on major items SettingsPage Lamp replacement Lamp replacement Replace the outer lamp cover Reset the lamp timeAbout lamp replacement messages Replace the inner lamp coverReplace the air filter Air filter cleaningUnplug power cord Remove the air filter Clean the filter Main unit cleaning Lens and main unit cleaning Lens cleaning Trouble indications No powerPower went out during use Power went out during use, or power won’t come onTroubleshooting Troubleshooting  Separately sold product Specifications List of general specifications Specification List of supported signals Computer input Specifications List of supported signals Hdmi input  List of supported signals Y/PB/PR input List of supported signals Video, S-Video input  Pin assignment  Control terminal Interface format  Main CommandsEN US EN GB Y007-6300
Top Page Image Contents