Ricoh PJ X3241N, PJ WX3231N owner manual  Projector settings Be sure to read this subsection

Using the menus 2

Setup using the Setting display (2)

Projector settings (Be sure to read this subsection.)

Using the factory settings as-is may suffer security damage, so be sure to change the projector settings.

1. Press the MENU button twice		The Setting display (2) is displayed.
2. Select a Category		* Appears only when Network or USB memory input is selected.
Select a category by using		Displays the current settings
.		of selected category.
The following 5 categories are		Item shown in gray cannot
		be set with the currently set
available:
Network Projector p.51		conditions of the projector.
setup
Network utility	p.51
setup
Control setting	p.57
Slideshow setup	p.58
Status display	p.60

3.Make settings Press or to open the menu.

Item

These marks signify the items can be

selected from the list by using .

After an item is selected, apply it by

pressing .

The figure shows a typical example. As the display may differ depending on the item, use the following pages as a reference.

While the video file transfer function of Network Utility or the slideshow function is in use, the background image of the Setting display (2) does not appear.

4. Back	RETURN button
5. End	Press the MENU button or RETURN button.
	(The menu disappears 30 seconds after the last operation is conducted.)

50