Ricoh PJ WX3231N, PJ X3241N Modifying the computer settings using the projector settings

Page 77

2)Modifying the computer settings using the projector settings

• Setting on the projector

1Turn the projector power on.

2Switch the input to Network.

3Press the MENU button twice, then select Easy Connect (USB memory) in Network Utility settings from the Setting display (2) menu and press the button.

4When a confirmation window appears, insert the USB memory device into the projector.

5Click Yes then press the button.

The wireless LAN settings are saved to the USB memory device. When successfully saved, a message appears.

6Unplug the USB memory device.

•Setting on the computer

7Launch the Network Utility software

application.

8Insert the USB memory device into the computer.

9After a confirmation message appears, make settings.

10When the setting is complete, the projector name of the connected projector or the projector ID (MAC address of wired LAN) is displayed in projector’s list in the Network utility window.

Note

•This operation is allowed only when the Transmission mode is set to Ad hoc in the projector’s wireless LAN settings. Be sure to use Network Utility version 1.0 or later.

Network/ USB memory

77

Page 76 Page 78
Image 77
Page 76 Page 78
Contents Data Projector USA only Safety PrecautionsBefore Using Ventilation Power SourcesSource of Light Power Cord Protection CleaningHeat Water and MoistureImportant Safety Instructions Damage Requiring Service AccessoriesSales representative for Repair service If glass componentsDo not use the product in a closed installation Location Replacement PartsSafety Check Avoid Volatile Liquid Place and Manner of InstallationMoisture Condensation Copyrights Important Precautions LCD PanelDisposal Following information is only for EU-member statesNotational Conventions Used in This Manual Other Information TrademarksContents Others MaintenanceNetwork/USB memory Checking the package contents Preparations Names of each part on the main unitRemote Control Names of each part on the control panel and remote controlButtons. Either is usable. p.20 p.65 91011 Names of the terminals on the rear panel Operating the remote Control Preparing and using the remote control Loading dry-cell batteries into the remote control Operating a computer Connecting a computerPlacement Styles PlacementProjection Distance and Size PlacementPJ X3241N Screen As seen from abovePJ WX3231N Screen As seen from above As seen from the side Before connection ConnectionPreparations  Connect the power cord Turning the power on and off Turn the power on Remove the lens capPrecautions  Turn the power offPress the ON/STANDBY button again Replace the lens capBasic operations Turn on the powerActivate the connected device Press the Input buttonAdjust the screen size and focus Adjust projector placement angleAdjust the volume with the buttons To fine adjust the angle, twist the foot adjusterLCD Panels Basic operations Using auto setting For computer input only Using handy featuresPress the remote control’s Auto SET button Adjusting Keystone distortion ManuallyPress the remote control’s Resize button Using handy featuresTo zoom out, press the remote control’s Resize Button  Resizing imagePress the remote control’s Screen Size button  Changing picture mode Cutting off the picture and sound temporarily Mute  Changing screen size Freezing the image Freeze  Setting the password How to change passwordPress the remote control’s Freeze button How to set password from On to Off How to set password from Off to OnHow to operate when password is On  Setup using the Setting display Using the menusContrast  The image adjustment menuFrequency Using the menus The display setting menu Precaution Blackboard modeDetailed description Screen size Up/down shiftLogo confirmation Reset logoDisplay style Detailed description Auto input search  The default setting menuNetwork input detection Input select menu ComputerLamp power Power onDetailed description Fan mode Voice guideClosed Caption Remote control code setting for remote controlKey lock  Displaying Information Status display  Connection using the Network Projector Windows Vista or Before connecting via a network Connection using the Network Utility Functions Caution when using the wireless LAN functions  Communication mode Ad hoc communication mode  Infrastructure communication mode Connecting USB device How to use the USB terminal Disconnecting USB device Plug in the USB device Backing up data  USB memory devices Supported files  The USB terminalControl setting Slideshow setup Status display  Projector settings Be sure to read this subsectionLAN  Setting up the Network Projector/Network UtilityItems using characters, numbers, and symbols Character entry mode Character entry Number only Details on individual items Network key When you have set Encryption to WEP  Security for wireless LAN settings Network authenticationWhen you have set Encryption to TKIP/AES Setting initialization Wired LAN settings  Computer settings  Detailed description  The control setting menuProjector name PJLinkWireless network  Setting slideshow optionsMovie Image  Details on individual items Still ImageCommon Checking the projector status Status display  Setting up the projector Using the Network Projector Setting up the computer Turn the projector power on Switch the input to Network How to install Installing the applications System Requirements  Application Types and Major Functions How to uninstall Select Transmission mode Using the Network UtilityLaunch the Network Utility software application Click the Advanced buttonClick the button Select the projector to be transmittedClick the Browse button, and select the file to send Using the Network UtilityClick the Jpeg File icon Click Movie File icon Click the Browse button and select the file to send Mute Select the projector to transmit toPlay the video file via the Control window Click the Multiscreen icon Layout.Arrange the virtual display Example Multiscreen Usage ExamplesUSB memory Using the Network Utility  Easy Connect utility Wireless LAN Settings Utility dialog box appearsLaunch the Network Utility software application Click the Tool buttonUnplug the USB memory device from the computer Copying the computer settings to the projectorUnplug the USB memory device Modifying the computer settings using the projector settingsSwitching settings automatically at start-up Advanced settingWEB browser Registering profile automaticallyClick the Remote Control window’s buttons Click the Remote Control buttonTo quit, click the button on the Remote Control window  Operating the projector Playing a slide show from a thumbnail list Symbols in the thumbnail listSearching for a target file Plug a USB memory deviceFor Jpeg files Displaying slides Changing slidesFast-forwarding and rewinding video images For Mpeg files Displaying video Converting an image file How to use the Jpeg Conversion Tool Launching the Jpeg Conversion Tool Conversion Method field, select Converting PPT file How to use the Jpeg Conversion Tool Converting files created with Microsoft PowerPoint Playing a slide show from a thumbnail list  Making a presentation with converted Jpeg filesJpeg file has been created Conversion Method field, select Creating screen capture How to use the Projector Configuration Tool Setting up the projector using a Web browserSelect items from the menu on the left Setting up the projector using a Web browserStatus display  Details on major items SettingsPage Lamp replacement Lamp replacement About lamp replacement messages Reset the lamp timeReplace the inner lamp cover Replace the outer lamp coverUnplug power cord Remove the air filter Air filter cleaningClean the filter Replace the air filter Main unit cleaning Lens and main unit cleaning Lens cleaning Power went out during use No powerPower went out during use, or power won’t come on Trouble indicationsTroubleshooting Troubleshooting  List of general specifications SpecificationsSpecification  Separately sold product List of supported signals Computer input Specifications List of supported signals Hdmi input  List of supported signals Y/PB/PR input List of supported signals Video, S-Video input  Pin assignment  Control terminal Interface format  Main CommandsEN US EN GB Y007-6300

PJ WX3231N, PJ X3241N specifications

The Ricoh PJ X3241N and PJ WX3231N projectors are designed to meet the demands of modern presentations, making them ideal choices for business and educational environments. Both models boast a compact, portable design that ensures easy transportation, allowing users to set up anywhere with minimal effort.

One of the key features of the Ricoh PJ X3241N is its impressive brightness level of up to 3,500 lumens, which enables vivid and clear images even in brightly lit rooms. This high brightness level ensures that presentations stand out and are easily visible to audiences of varying sizes. Similarly, the PJ WX3231N offers a brightness of 3,200 lumens, making it suitable for a range of lighting conditions.

Both projectors utilize DLP (Digital Light Processing) technology, ensuring excellent color accuracy and sharp image quality. The PJ X3241N features a native XGA resolution of 1024 x 768, while the PJ WX3231N has a WXGA resolution of 1280 x 800, allowing it to display widescreen presentations with remarkable clarity. This enhanced resolution is particularly beneficial for media-rich content, ensuring viewers do not miss any important details.

Connectivity options are extensive on both models, featuring HDMI, USB, and VGA ports, which facilitate easy connections to various devices, including laptops, tablets, and USB drives. This versatility makes it convenient for users to present their materials without extensive setup time. Additionally, the PJ WX3231N has integrated wireless capabilities, allowing for seamless connectivity without the need for cables, thereby reducing clutter during presentations.

The Ricoh PJ X3241N and PJ WX3231N are also designed with user-friendly features, such as easy-to-navigate menus and remote control options, which simplify the setup process. Furthermore, both projectors come equipped with a long lamp life of approximately 5,000 hours in standard mode, reducing maintenance needs and operating costs over time.

In conclusion, the Ricoh PJ X3241N and PJ WX3231N projectors stand out for their combination of portability, high brightness levels, resolution options, extensive connectivity, and user-friendly features. These attributes make them excellent choices for professionals and educators seeking reliable projection solutions that deliver high-quality visuals in a variety of settings. With Ricoh's commitment to performance and innovation, these projectors continue to meet the evolving demands of today's presentation technologies.
Top Page Image Contents