Ricoh PJ X3241N, PJ WX3231N owner manual Using the menus,  Setup using the Setting display

Using the menus 1

You can call up on-screen menus, and conduct a number of adjustments and settings using the MENU button p.16 on the control panel of the main unit and remote control.

Setup using the Setting display

The menu shown below is for operation instructions purposes and might differ from the actual display.

1.Press the MENU button This will display the Setting display menu.

2.Select a Category

Select a category by using	.
There are 5 categories:
Image adjustment menu p.37		Displays the current
Display setting menu	p.39	adjustments and
		settings of the selected
Default setting 1 menu	p.42	category.
		Items shown in gray
Default setting 2 menu	p.43	cannot be adjusted with
		the current input source.
Status display menu	p.45

3. Adjustments & Settings Press or to open the menu.

Item

Adjustment/Setting Value

	These marks signify
	the items can be				These marks signify
	adjusted/set by using
		These marks			that there are setting
	.
		signify that there			screens. Press		or
		are options.				to display a list of
		Press	or		setting screens.
		to display a list of
These marks signify the items can		options.			* When no item is
be selected from the list by using						changed, press	.
.
After an item is selected, apply it by		Toggle items with		.
pressing	.	Select items with			and press	.
		Fix selection with		.

•The figure shows displays given for operation instructions purposes. As the display may differ depending on the item, refer to the following applicable pages for the menu item you desire.

•To return to previous item, press the RETURN button.

•When Network or USB memory input is selected, pressing the MENU button twice displays the Setting display (2) menu.

4. End Press the MENU button once more.

(The menu will disappear automatically after 30 seconds, if no operation is conducted.)

36