Ricoh A741 manual Size of paging file, PC bios setting

Page 15

2.6Size of paging file

Windows can simulate more memory than physically available in the machine. The additional memory is simulated by means of a paging file on the harddisk. Please make sure that the size of this paging file is set correctly, minimum 300Mb, maximum size 500Mb.

How to set/check?

Goto the 'control panel' and start the 'System' applet, select the 'Performance' tab and set/check the minimum and maximum values.

2.7PC bios setting

Unlike Windows '95, Windows NT 4.0 is not a plug-and-play operating system. To avoid potential problems with the setup of the PCI cards, we have to set the PC bios not to expect a PnP operating system. The bios will then take care of the Interrupt and DMA assignments.

How to set/check?

NOTE: This procedure will work on many Mainboards, systems like DELL, Compaq etc. have their own way of entering the BIOS setup and BIOS settings. Some systems do not offer this setting or it is located at a different location as described below.

•At power-up selftest hit the DEL key.

•Look for the PCI/PNP settings

•Check if there is a setting like 'PnP aware OS' or 'PnP enabled OS', change this setting to 'No' or 'Disabled'.

Print Server Manual

7

A741

Image 15

Contents A741 Controller Print Server Manual Page Introduction Page Table of Contents Direct Printing from Autocad A741 Repro Program Installing / Using Network ClientsFrequently Asked Questions General Frequently Asked Questions A741 Repro System OverviewFrequently Asked Questions Scanning Frequently Asked Questions PRINTING/PLOTTINGFrequently Asked Questions Image VIEWING/HANDLING Frequently Asked Questions NetworkGlossary Description of Lbtest Program File Formats SpecificationsA741 specifications basic A741 Repro SpecificationsA741 Repro functions Management Printer DriversA741 Repro functions Printing A741 Repro functions ScanningOptions Minimum PC specifications Server onlyA741 SIM InstallationEprom replacement New SIMulationsPC Specifications PCI card installationA741 internal cabling Size of paging file PC bios settingVarious hints & Tips on installation A741 Repro Software installation1 A741 Repro System Software installation Upgrading an existing installationPrint Server Manual A741 How do I de-install the A741 Repro System program? PC networking With a previous network installation Print Server PC Functional block diagram of A741 Repro SystemA741 General Trouble-shootingSigns of problems Problem listingA741 produces blank pages when printing Detailed corrective actionsSelect the correct PCI slot for the A741 Repro System card Starting stopping Littlebear driver and rfxServer Each time I re-boot the Server PC, rfxServer will not startRfxServer will not start Cannot maximize Client window Use of the Event logA741 Press button on card Lbtest Commands Lbtest Version x.x, OptionsStarting the Lbtest program Print, Scan, test Button, or Fifo testsRe-starting or stopping the Littlebear driver and rfxServer Test command PrintTest command Fifo Test SelectionA741 Repro Server preparation Installing / Using Network ClientsInstalling the Repro Sytem from CD-ROM Installing Xi Repro Server/ Local Client system SystemMultiple Remote Clients Installing the Remote Client system on remote PC’sView the status of a remote A741 printer A741 Direct printing from AutoCAD A741 A741 Repro Program Introduction Setting program optionsImporting documents, how are they processed? Setting program defaultsUse of stamps Use of pensetsA741 Can I use an existing PC from the customer? Frequently Asked Questions GeneralWhat is the purpose of the Xi Repro System Print Server? Can I use the A741 Print Server for other jobs as well?Vector What is the difference between printing and plotting?What is rasterising? RasterWhat is vectorising? A741 Network block diagram Frequently Asked Questions A741 Repro System overviewA741 Frequently Asked Questions Printing/Plotting Can we print multiple documents? HP-GL & HP-GL/2Can we define custom pen sets? What is a penset?Can we do group or set printing? Can we add information text to each printed document?A741 Which image handling options does A741 Repro have? Frequently Asked Questions Image Viewing/HandlingCan we preview the document before plotting/printing? Can we modify the image before it will be printed?A741 Can we submit print jobs via e-mail? Frequently Asked Questions NetworkCan we print via a network? Which networks & protocols can we use?What protocols are compatible with the A741 Print Server? How are licenses configured for the A741 Print Server?Print Server Manual A741 A741 Frequently Asked Questions Scanning Can we scan at a lower resolution to reduce the filesize? What is de-speckle?What is de-skew? Frequently Asked Questions Project Management What is the purpose of a project?Do we provide any kind of accounting? A741 APS GlossaryAMS AsciiFAQ DOSDPI Html GDIGUI HP-GLIPX/SPX LANOCR PPM OSDPCL PDLTCP/IP ROMScsi SohoTwain WPSWysiwig A741 Lbtest Commands CommandPurpose Of Document Command c Command s Command rCommand d Command wCommand t Command fCommand q Exit Lbtest Troubleshooting Print Server Manual A741 A741