•See chapter 4.4.2, Make sure the operator of the A741 Repro System has 'Administrator' rights
The A741 produces blank pages when printing
•
Only a part of the Client window is shown, impossible to
•Check fontsize setting of display. See chapter 4.8 Cannot maximize Client window
The Server program does not start (at Boot time or when started manually from the Control panel)
•See if the Littebear driver is started, see chapter 4.5, Starting (stopping) Littlebear driver and rfxServer
See also chapter, 4.6 rfxServer will not start
4.4Detailed corrective actions
4.4.1Check the operation of the network Server PC
Check if the network is operational, do this by
Client PC
Make sure the Server PC is working and configured properly (including the network connection).
4.4.2Make sure the operator of the A741 Repro System has
'Administrator' rights
The 'Administrator' rights are required on the Server PC only, not on the Client PC's. Typical sign of this problem is an error message that the path of the 'LOCAL SPOOL' directory cannot be found in the REGISTRY.
4.4.3Select the correct PCI slot for the A741 Repro System card
It is known that the A741 Repro System PCI controller may not work properly with all motherboards. Signs of trouble are problems with DMA transfers (see chapter: 4.9.6, Test command – F(ifo) ).
Until now this problem has only been seen on Pentium II systems, but may be present with other type of processors as well.
Which boards will work correctly?
•Systems with original Intel AL440LX Pentium II motherboards,
A typical board with problems is shown on the next page:
A741 | 16 | Print Server Manual |