8 Frequently Asked Questions: General
8.1What is the purpose of the Xi REPRO System Print Server?
The A741 Repro System Print Server forms an integral part of the A741. It serves 4 main purposes:
•Physical connection to the A741 and network (see also 9.2)
•Handle print requests from the
•User terminal for scanning actions (see also
•Provide A741 status feedback to the users in the network.
•
8.2What are the minimum specifications for the A741 Repro System Print Server?
Minimum specifications are:
Processor: | Pentium Pro or Pentium II 200Mhz or faster |
Memory: | 128Mb minimum (will not work with less memory!) |
Harddisk: | 2Gb, IDE interface. Actual storage space depends on |
| storage |
| requirements from the customer |
Monitor: | 17" or larger (minimum resolution 800x600) |
Software: | Windows NT 4.0 workstation (With SP 3) |
Network interface | Any type |
8.3Can I use the A741 Print Server for other jobs as well?
You can use the A741 Repro System server for other jobs as well, but printing (specifically the RIPping part) demands a lot of resources of the PC. When sending frequent print jobs to the server, it is advised not to use the server PC for other tasks.
8.4Can I use an existing PC from the customer?
Yes, as long as the PC complies with the specifications as mentioned in question 8.2.
Note: It is advised NOT to use the network file server for the A741 Repro System. In many cases this system will comply to the required specifications. During printing the A741 Repro System Software requires nearly 100% of the CPU time and large amounts of memory, disrupting the normal operation of the file server. (see also 8.3)
8.5Which software is bundled with A741 Repro System?
With the A741 Repro System program no specific programs for image editing and manipulation will be bundled. In many cases the user is already using a variety of image editing/creation programs. Both Windows '95 and Windows NT have the 'Wang Imaging' program included, standard.
Print Server Manual | 33 | A741 |