Ricoh manual How are licenses configured for the A741 Print Server?

Page 54

12.7My, remote network PC with CAD software loaded cannot print to the A741. Why?

Even if you have network connection to the shared printer on the A741 Print Server, the Ricoh Controller software must be installed on the remote client. Without the Ricoh Controller software, the remote client will not be able to send print jobs to the A741 Print Server.

Jobs printed to the A741 Print Server from remote clients must be printed through the Ricoh Controller software loaded on the remote clients.

12.8How are licenses configured for the A741 Print Server?

When specifying licensees, enter the Computer Name as specified in the Control Panel's, Network's, Identification tab. The A741 Print Server must be configured in the same domain or workgroup as the remote clients or the licensing will not function correctly.

12.9What protocols are compatible with the A741 Print Server?

The native protocol for the A741 Print Server is TCP/IP. However, other protocols may be implemented. It is important to remember that the remote clients must support the same protocol as the A741 print server otherwise communication, between the devices, will not be possible. Some of the protocols supported include TCP/IP, IPX/SPX, and NetBEUI.

12.10What Media Access Methods are compatible with the A741 Print Server?

The Media Access Methods supported by the A741 Print Server include Ethernet and Token Ring. The type of method used depends on the network interface hardware located in the A741 Print Server and the remote clients PC's.

12.11Are there any password recommendations to be made for the A741 Print Server and Remote Client PC's?

It is recommended that for each remote client, an account be configured on the A741 Print Server that uses the same user name and password that the remote client uses to log into the already established network (i.e. Novell NetWare or Microsoft NT or Microsoft Peer-To-Peer NetBEUI network). Creating such accounts allow the remote client to connect to the shared printer on the A741 Print Server without having to enter a separate username or password.

A741

46

Print Server Manual

Image 54
Contents A741 Controller Print Server Manual Page Introduction Page Table of Contents Frequently Asked Questions A741 Repro System Overview Installing / Using Network ClientsFrequently Asked Questions General Direct Printing from Autocad A741 Repro ProgramFrequently Asked Questions Network Frequently Asked Questions PRINTING/PLOTTINGFrequently Asked Questions Image VIEWING/HANDLING Frequently Asked Questions ScanningGlossary Description of Lbtest Program A741 Repro Specifications SpecificationsA741 specifications basic File FormatsA741 Repro functions Scanning Printer DriversA741 Repro functions Printing A741 Repro functions ManagementMinimum PC specifications Server only OptionsA741 New SIMulations InstallationEprom replacement SIMPC Specifications PCI card installationA741 internal cabling PC bios setting Size of paging fileUpgrading an existing installation A741 Repro Software installation1 A741 Repro System Software installation Various hints & Tips on installationPrint Server Manual A741 How do I de-install the A741 Repro System program? PC networking With a previous network installation Functional block diagram of A741 Repro System Print Server PCA741 Problem listing Trouble-shootingSigns of problems GeneralA741 produces blank pages when printing Detailed corrective actionsSelect the correct PCI slot for the A741 Repro System card Each time I re-boot the Server PC, rfxServer will not start Starting stopping Littlebear driver and rfxServerRfxServer will not start Use of the Event log Cannot maximize Client windowA741 Print, Scan, test Button, or Fifo tests Lbtest Commands Lbtest Version x.x, OptionsStarting the Lbtest program Press button on cardTest Selection Test command PrintTest command Fifo Re-starting or stopping the Littlebear driver and rfxServerInstalling Xi Repro Server/ Local Client system System Installing / Using Network ClientsInstalling the Repro Sytem from CD-ROM A741 Repro Server preparationInstalling the Remote Client system on remote PC’s Multiple Remote ClientsView the status of a remote A741 printer A741 Direct printing from AutoCAD A741 Introduction Setting program options A741 Repro ProgramSetting program defaults Importing documents, how are they processed?Use of pensets Use of stampsA741 Can I use the A741 Print Server for other jobs as well? Frequently Asked Questions GeneralWhat is the purpose of the Xi Repro System Print Server? Can I use an existing PC from the customer?Raster What is the difference between printing and plotting?What is rasterising? VectorWhat is vectorising? A741 Frequently Asked Questions A741 Repro System overview Network block diagramA741 Frequently Asked Questions Printing/Plotting HP-GL & HP-GL/2 Can we print multiple documents?Can we add information text to each printed document? What is a penset?Can we do group or set printing? Can we define custom pen sets?A741 Can we modify the image before it will be printed? Frequently Asked Questions Image Viewing/HandlingCan we preview the document before plotting/printing? Which image handling options does A741 Repro have?A741 Which networks & protocols can we use? Frequently Asked Questions NetworkCan we print via a network? Can we submit print jobs via e-mail?How are licenses configured for the A741 Print Server? What protocols are compatible with the A741 Print Server?Print Server Manual A741 A741 Frequently Asked Questions Scanning Can we scan at a lower resolution to reduce the filesize? What is de-speckle?What is de-skew? Frequently Asked Questions Project Management What is the purpose of a project?Do we provide any kind of accounting? A741 Ascii GlossaryAMS APSFAQ DOSDPI HP-GL GDIGUI HtmlIPX/SPX LANOCR PDL OSDPCL PPMSoho ROMScsi TCP/IPTwain WPSWysiwig A741 Lbtest Commands CommandPurpose Of Document Command c Command r Command sCommand w Command dCommand f Command tCommand q Exit Lbtest Troubleshooting Print Server Manual A741 A741