![](/images/new-backgrounds/1126978/12697897x1.webp)
5.Load one type of print material in the MP tray. Do not mix types. See the following directions to load each type of print material.
•Load paper with the left edge of the stack against the left edge of the tray with the print side face up.
•Load envelopes with the flap side down. The stamp area is on the left side. The end of the envelope with the stamp area enters the MP tray first.
Note:
•Do not feed stamped envelopes. The stamp is shown for placement only.
•Never use envelopes with clasps, snaps, windows, coated lining, or
•Load transparencies or label sheet with a paper backing, load with the paper side down.