Configuring the PCL Drivers
Selecting Your Printer
To use all of the features of your QwikLaser 6100, make sure the PCL6 driver is selected as the default printer. When you install the printer driver, QwikLaser 6100 is automatically set as the default printer. If you use more than one printer, you can select the QwikLaser 6100 as the default printer as follows:
Windows 95/98/NT 4.0
1.Select Start ➝ Settings ➝ Printers.
2.
3.Select Set As Default from the Printer menu.
4.To set the printer’s properties, select Properties from the Printer menu and change the settings as described in the section “Setting Properties” (page 4.3).
Windows 3.1x
1.
Control Panel, then Printers.
2.Select Samsung 6100 Series PCL6.
3.Click Set As Default Printer.
4.To set the printer’s properties, click Setup and change the settings as described in the section “Setting Properties” (page 4.3).
4. 2 Printing