Samsung SCX-4500W manual Scanning with network, Setting scan information in Scan Manager

Scanning with network

1Make sure that your machine and computer are turned on.

2Place a single document face down on the document glass. OR load the document(s) face up into the ADF (or DADF).

3Start Applications and click Image Capture.

4Click Devices and click Browse Devices.

5For MAC OS X 10.4:

Select your machine in Twain devices option. Make sure that Use TWAIN software checkbox is checked, and click Connect.

For MAC OS X 10.5:

Make sure that Connected checkbox is checked beside your machine in Bonjour Devices.

If you want to scan using TWAIN, refer to the MAC OS X 10.4 procedure above.

6Set the scan options on this program.

7Scan and save your scanned image.

NOTE:

•If scanning does not operate, update Mac OS to the latest version. Scanning operates properly in Mac OS 10.3.9 or higher and Mac OS 10.4.7 or higher.

•If you want to scan via the DADF, use TWAIN-compliant softwares.

•For more information about using Image Capture, please refer to the Image Capture’s help.

•You can also scan using TWAIN-compliant softwares, such as Adobe Photoshop.

•Scan process differ according to TWAIN-compliant softwares. Please refer to the user’s guide of the software.

Setting scan information in Scan Manager.

You can find out about Scan Manager program information and installed scan driver's condition. Also, you can change scan settings and add or delete the folders where scanned documents to computer are save in Scan Manager program.

1Open Scan Manager in Smart Panel menu on Status bar.

2Set Scan Button allows you to change the saving destination and scan settings, add or delete application program and format files. You can change the scanning machine by using Change port. (Local or Network)

3Press OK after setting is done.

41