5Click Next.
If wireless security setting window appears, enter the registered password (network key) and click Next.
6Wizard Setup Confirmation window appears, please check your wireless setup. If the setup is right, click Apply.
7Click OK.
Note
• Disconnect the network cable (standard or crossover). Your machine should then start communicating wirelessly with the network. In case of
•If Operation Mode is Infrastructure, you must disconnect the network cable to activate wireless network after completing the network setting.
Now go to Installing the software.
Installing the software
You must install the printer driver software for printing. The software includes drivers, applications, and other user friendly programs.
Note
The following procedure is based on Windows XP. The procedure
and popup window which appears during the installation may differ depending on the operating system, machine features, or the interface in use.
Make sure that the network setup for your machine is completed. (See "Setting up the network" on page 3.2.) All applications should be closed on your computer before beginning the installation.
If your IP assignment method is DHCP and IP address can be changed whenever machine in turned on, we recommend you to use the Bonjour program. Go to the http://developer.apple.com/networking/bonjour/ download/, select the program Bonjour for Windows according to your
computer operating system, and install the program. In case of Mac OS X, this program might be already installed in your PC. This program will allow you to fix the network parameter automatically. This Bonjour program does not support Linux.
If your IP assignment method is static, follow the steps below.
1Insert the Printer Software
2Click Next.
If the installation window does not appear, click Start > Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK.
If you use Windows Vista, click Start > All Programs > Accessories > Run, and type X:\Setup.exe.
Note
The installation window may slightly differ, if you are reinstalling the driver.
3Select Typical installation for a network printer, and then click Next.
4The list of machines available on the network appears. Select the printer you want to install from the list and then click Next.
Note
•If you do not see your machine on the list, click Update to refresh the list, or select Add TCP/IP Port to add your machine to the network. To add the machine to the network, enter the port name and the IP address for the machine.
•To verify your machine’s IP address or the MAC address, print a Network Configuration Report page. (See "Printing a machine report" on page 8.1.)
5After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung machines in order to receive information from Samsung. If you so desire, select the corresponding checkbox(es) and click Finish.
Note
If your machine does not work properly after the installation, try to reinstall the printer driver. See Software section.
3.8 <Getting Started>