Samsung SCX-4500W manual Configuring the machine’s wireless network, Using SyncThru Web Service

Configuring the machine’s wireless network

Before starting you will need to know the SSID of your wireless network and the Network Key if it is encrypted. This information was set when the access point was installed. If you do not know about your wireless environment, please ask the person who has set up your network.

Using SyncThru™ Web Service

Before starting wireless parameter configuration, make sure cable connection status.

1Start a web browser such as Internet Explorer, Safari or Firefox and enter your machine’s new IP address in the browser window.

For example,

2When the SyncThru™ Web Service window opens, click Network Settings.

3Click Wireless and Select Wizard. Then, click Next.

Note

Wizard will help you setup the wireless network configuration. However, if you want to set the wireless network directly, select Custom.

4Select the one Network Name(SSID) in the list.

•SSID: SSID(Service Set Identifier) is a name that identifies a wireless network. Access points and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case-sensitive.

•Operation Mode: Operation Mode refers to the type of wireless connections.

-Ad-hoc: allows wireless devices to communicate directly with each other in a peer-to-peer environment.

-Infrastructure: allows wireless devices to communicate with each other through an access point.

Note

If your network’s operation mode is Infrastructure, select the SSID of the access point. If the operation mode is Ad-hoc, select the machine’s SSID. Note that “airportthru” is the default SSID of your machine.

3.7 <Getting Started>