Disassembly and Reassembly
5.3 Fuser
5.3.1 Fuser(Heat Lamp Type)
1.Before you remove the Fuser, you should remove:
-Top Cover(see page
2.Unplug two connectors(Block) from the boards, then remove four screws.
Fuser Ass'y |
3.Remove two screws and take the Thermostat out of the Fuser.
Thermostat |
5. Remove one screw and take the Idle Gear out.
Idle Gear |
6.Remove four screws and divide the Fuser into two parts
Fuser Cover |
4.Remove two screws and take the Halogen Lamp out of the Heat Roller.
Heat Roller |
Halogen Lamp |
7. Remove the Thermister from the Fuser Cover.
Thermister |
Service Manual