Disassembly and Reassembly
5.13 Pick Up Roller & Solenoid
1.Before you remove the Fuser, you should remove:
-Top Cover(see page
-Drive Ass’y(see page
-Engine Shield Ass’y(see page
2.Remove three screws from the Feed Bracket and take it out.
Feed Bracket |
3.Remove the Pick up Gear Ass’y, as shown below.
Pick up Gear |
Ass'y |
4. Remove the Pick up Ass’y, as shown below.
Bush |
1 |
2 |
Pick up Ass'y |
5.Remove two screw then remove The Manual Solenoid and Pick Up Solenoid.
(Pick up) |
Solenoid |
(Manual) |
Solenoid |
Service Manual