Samsung ML-1700 specifications Consumables and Replacement Parts, LED Status Display by Each Error

ALIGNMENT & ADJUSTMENTS

6.5 Consumables and Replacement Parts

The cycle period outlined below is a general guideline for maintenance.

The example list is for an average usage of 50 transmitted and received documents per day. Environmental conditions and actual use will vary these factors.

The cycle period given below is for reference only.

COMPONENT	REPLACEMENT CYCLE
Pick-up Roller	60,000 Pages
Paepr Feeding Roller(Friction Pad)	60,000 Pages
Transfer Roller	60,000 Pages
Fuser	60,000 Pages
Toner Cartridge	3,000 Pages

6.6 The LED Status Display by Each Error

ERROR	LED Status	DCU CODE
Open Fuser Error	The [Error] LED (red) and the [Toner Save] LED are simultaneously	60
	flashing every one-second.
Over Heat Error	The [Error] LED (orange) and the [Toner Save] LED are	68
	simultaneously flashing every one-second.
Low Heat Error	The [Error] LED (red) and the [Toner Save] LED are simultaneously	62
	flashing every 4 seconds.
LSU not Ready Error	The [Error] LED (green) and the [Toner Save] LED are	95
(Pmotor Error)	simultaneously flashing every one-second.
LSU Not Ready Error	The printing is stop in the fad status, and the [Error] LED (green) and	96
(HSYNC Error)	the [Toner Save] LED are simultaneously flashing every 4 seconds.

Service Manual

6-12

Samsung Electronics