Samsung ML-1610 manual Only use labels recommended for laser printers

Page 35

•For envelopes:

-Use only well-constructed envelopes with sharp, well creased folds.

-Do not use envelopes with clasps and snaps.

-Do not use envelopes with windows, coated lining, self- adhesive seals, or other synthetic materials.

-Do not use damaged or poorly made envelopes.

-Only use envelopes recommended for laser printers. Before loading envelopes in the tray, make sure that they are undamaged and are not stuck together.

-Do not feed stamped envelopes.

•For transparencies:

-Place them on a flat surface after removing them from the printer.

-Do not leave them in the paper tray for long periods of time. Dust and dirt may accumulate on them resulting in spotty printing.

-To avoid smudging caused by fingerprints, handle them and coated paper carefully.

-To avoid fading, do not expose the printed transparencies to prolonged sunlight.

-Only use transparencies recommended for use in laser printers.

-Ensure that transparencies are not wrinkled, curled, or have any torn edges.

•For labels:

-Verify that their adhesive material can tolerate fusing temperature of 180 oC (356o F) for 0.1 second.

-Make sure that there is no exposed adhesive material between them. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to machine components.

-Do not load a sheet of them through the printer more than once. The adhesive backing is designed for one pass through the machine.

-Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged.

-Only use labels recommended for laser printers.

3.4 USING PRINT MATERIALS

Image 35

Contents ML-1610 Series About the User’s Guide Contents Redistributing Toner Replacing the Toner Cartridge Cleaning the Outside Cleaning the InsideImportant Precautions and Safety Information 17SAVE These Instructions Environmental and Safety Consideration Ozone Safety Radio Frequency Emissions Declaration of Conformity European Countries Page Introduction You can print in Windows 98/Me/2000/XP Special FeaturesYou can print at 600 dots per inch dpi Up to 16 ppm in A4 17 ppm in LetterFeature Printer Driver Printer Driver FeaturesFront View Printer ComponentsRear View Description On Line/Error and Toner Save LEDsSee Troubleshooting Error Messages on Understanding the Control PanelFunction Description Cancel buttonSetting Up Your Printer Components may differ from one country to another UnpackingPaper Cover a Clearance Space Selecting a LocationCarefully remove all of packing tape from the printer Grasp the front cover and pull it toward you to open Installing the Toner CartridgeSetting UP Your Printer Setting UP Your Printer You can load approximately 150 sheets of paper in the tray Loading PaperLoad paper with the print side facing up Connecting a Printer Cable Turning the Printer on Printing a Demo Demo page shows the printer’s current configurationVarious Linux See Software User’s Guide Installing Printer SoftwareSystem Requirements Setting UP Your Printer Using Print Materials Choosing Paper and Other Materials Plain paper Type, Input Sources and CapacitiesGuidelines for Paper and Special Materials Paper Type Input Source/Capacitya Paper Tray Manual FeedOnly use labels recommended for laser printers Using Print Materials Verifying the Output Location Using the TrayRepeat this step for every page to be printed Using Manual Feed ModePrinting on Special Materials Using Print Materials Press the Cancel button on the control panel Canceling a Print JobThere are two ways to cancel a print job Double-click this icon to view Queue of the print jobs Maintaining Your Printer Toner cartridge storage Maintaining the Toner CartridgeRedistributing Toner Maintaining Your Printer Replacing the Toner Cartridge Using the Toner Save ModeCleaning the Inside Cleaning the PrinterCleaning the Outside Cleaning inside the printer Maintaining Your Printer Pick-up Roller Consumables and Replacement PartsItems Yield Average Transfer RollerSolving Problems Line/Error LED is on Troubleshooting ChecklistCheck Solution Problem Possible Cause Solution Solving General Printing ProblemsSoftware User’s Guide. Try printing a But are blank Defective or out Toner Text is wrongGarbled, or Paper Exit Area Clearing Paper JamsSolving Problems Paper Feed Area Around the Toner Cartridge Tips for Avoiding Paper Jams Solving Print Quality ProblemsPrint Quality Checklist Print Solving Print Quality ProblemsChange to a lighter weight pages. See Paper Scratched. Install a new toner cartridgeDirty. Clean the LSU. See Cleaning the Inside on 4.6. Contact your service representativeProblem Solution Black pages Wrinkles orPoor Image quality CurlToner cartridge and install a new one. See Troubleshooting Error MessagesLED pattern Possible Problems and Solutions Appears during Common Windows ProblemsProblem Possible Cause and Solution File in Use message/etc/printcap file Common Linux ProblemsWhite nothing is Memory usage Am trying to print aRotated and cropped That would result in a cropped outputAble to print Errors Owning the spooler daemon On my PCL or SPLError messages printing Your software vendor to inform them of the issuePrinter Specifications Paper Specifications Specifications80 % RH Printer SpecificationsSpecifications and Description Overview Paper Specifications60 to 120 g/m2 bond 16 to 32 lb Maximum size Legal Size mm/in.a Weight CapacitybSupported Sizes of Paper Symptom Problem with Solution Paper Guidelines for Using PaperOutput Tray Capacity Paper SpecificationsCategory Specifications Paper Output CapacityPrinter and Paper Storage Environment Index USB cable, connect Software User’s Guide Installing Printer Software in Windows Sharing the Printer Locally Installing Printer Software in Windows Installing Printer Software in WindowsChanging the Software Language Choose the type of installationRemoving Printer Software Reinstalling Printer SoftwareSelect your printer driver from the Name drop-down list Printing a DocumentBasic Printing Layout Options Printer SettingsLayout Tab OrientationScaling Paper TabCopies SizeDarkness ResolutionToner Save Mode Graphics TabPrinter Tab Extras TabAbout Tab Using Help Using a Favorite SettingPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting a Reduced or Enlarged Document Printing PostersFitting Your Document to a Selected Paper Size Using WatermarksUsing an Existing Watermark Watermark section. The Edit Watermark window appears Creating a WatermarkEditing a Watermark Deleting a WatermarkCreating a New Page Overlay Using OverlaysWhat is an Overlay? Click Delete Overlay Using a Page OverlayDeleting a Page Overlay Windows NT 4.0 or higher Setting Up a Host ComputerSetting Up a Client Computer Windows 9x/Me→ your printer driver name → Troubleshooting Guide Installing Status MonitorOpening the Troubleshooting Guide Using Status MonitorFollowing window opens Changing the Status Monitor Program SettingsRecommended Capacities Using Your Printer in LinuxSystem Requirements Supported OSInstalling the Printer Driver Changing the Printer Connection Method Select Complete uninstall and then click Uninstall Using the Configuration ToolUninstalling the Printer Driver Changing Llpr Properties Language, change 4 Layout properties, set Rev.1.00