Samsung ML-1610 manual Software User’s Guide. Try printing a

Page 55

Problem

Possible Cause

Solution

 

 

 

The printer

The printer driver may

Reinstall the printer driver; see

does not print.

be incorrectly

Software User’s Guide. Try printing a

(continued)

installed.

demo page.

 

 

 

 

The printer is

Check the LEDs on the control panel to

 

malfunctioning.

determine if the printer is indicating a

 

 

system error.

 

 

 

Paper does not

Paper has not been

Remove paper from the tray and reload it

feed into the

loaded correctly.

correctly.

printer.

 

 

There is too much

Remove excess paper from the tray.

 

 

paper in the tray.

 

 

 

 

 

The paper is too thick.

Use only paper that meets the

 

 

specifications required by the printer.

 

 

 

Print job is

The job may be very

Reduce the complexity of the page or try

extremely

complex.

adjusting the print quality settings.

slow.

 

The maximum print speed of the printer

 

 

 

 

is 16(A4) or 17(Letter) pages per minute.

 

 

 

 

If using Windows 98/

From the Start menu, choose Settings

 

Me, the Spooling

and Printers. Right-click the your

 

Setting may be set

printer icon, choose Properties, click

 

incorrectly.

the Details tab, and then choose the

 

 

Spool Settings button. Select the

 

 

desired spool setting.

 

 

 

Half the page

The page layout is too

Simplify the page layout and remove any

is blank.

complex.

unnecessary graphics from the document.

 

 

 

 

The page orientation

Change the page orientation in your

 

setting may be

application.

 

incorrect.

 

 

 

 

 

The paper size and

Ensure that the paper size in the print

 

the paper size settings

settings matches the paper in the tray.

 

do not match.

 

 

 

 

The paper

There is too much

Remove excess paper from the tray.

keeps

paper in the paper

If printing on special materials, use the

jamming.

tray.

manual feed mode.

 

 

 

 

An incorrect type of

Use only paper that meets the

 

paper is being used.

specifications required by the printer.

 

 

 

 

There may be debris

Open the front cover and remove the

 

inside the machine.

debris.

 

 

 

5.4 SOLVING PROBLEMS

Page 54 Page 56
Image 55
Page 54 Page 56
Contents ML-1610 Series About the User’s Guide Contents Redistributing Toner Replacing the Toner Cartridge Cleaning the Outside Cleaning the InsideImportant Precautions and Safety Information 17SAVE These Instructions Environmental and Safety Consideration Ozone Safety Radio Frequency Emissions Declaration of Conformity European Countries Page Introduction You can print in Windows 98/Me/2000/XP Special FeaturesYou can print at 600 dots per inch dpi Up to 16 ppm in A4 17 ppm in LetterFeature Printer Driver Printer Driver FeaturesFront View Printer ComponentsRear View Description On Line/Error and Toner Save LEDsSee Troubleshooting Error Messages on Understanding the Control PanelFunction Description Cancel buttonSetting Up Your Printer Paper Cover a UnpackingComponents may differ from one country to another Carefully remove all of packing tape from the printer Selecting a LocationClearance Space Grasp the front cover and pull it toward you to open Installing the Toner CartridgeSetting UP Your Printer Setting UP Your Printer You can load approximately 150 sheets of paper in the tray Loading PaperLoad paper with the print side facing up Connecting a Printer Cable Turning the Printer on Printing a Demo Demo page shows the printer’s current configurationSystem Requirements Installing Printer SoftwareVarious Linux See Software User’s Guide Setting UP Your Printer Using Print Materials Choosing Paper and Other Materials Plain paper Type, Input Sources and CapacitiesGuidelines for Paper and Special Materials Paper Type Input Source/Capacitya Paper Tray Manual FeedOnly use labels recommended for laser printers Using Print Materials Verifying the Output Location Using the TrayRepeat this step for every page to be printed Using Manual Feed ModePrinting on Special Materials Using Print Materials There are two ways to cancel a print job Canceling a Print JobPress the Cancel button on the control panel Double-click this icon to view Queue of the print jobs Maintaining Your Printer Toner cartridge storage Maintaining the Toner CartridgeRedistributing Toner Maintaining Your Printer Replacing the Toner Cartridge Using the Toner Save ModeCleaning the Outside Cleaning the PrinterCleaning the Inside Cleaning inside the printer Maintaining Your Printer Pick-up Roller Consumables and Replacement PartsItems Yield Average Transfer RollerSolving Problems Check Solution Troubleshooting ChecklistLine/Error LED is on Problem Possible Cause Solution Solving General Printing ProblemsSoftware User’s Guide. Try printing a Garbled, or Text is wrongBut are blank Defective or out Toner Paper Exit Area Clearing Paper JamsSolving Problems Paper Feed Area Around the Toner Cartridge Print Quality Checklist Solving Print Quality ProblemsTips for Avoiding Paper Jams Print Solving Print Quality ProblemsChange to a lighter weight pages. See Paper Scratched. Install a new toner cartridgeDirty. Clean the LSU. See Cleaning the Inside on 4.6. Contact your service representativeProblem Solution Black pages Wrinkles orPoor Image quality CurlLED pattern Possible Problems and Solutions Troubleshooting Error MessagesToner cartridge and install a new one. See Appears during Common Windows ProblemsProblem Possible Cause and Solution File in Use message/etc/printcap file Common Linux ProblemsWhite nothing is Memory usage Am trying to print aRotated and cropped That would result in a cropped outputAble to print Errors Owning the spooler daemon On my PCL or SPLError messages printing Your software vendor to inform them of the issuePrinter Specifications Paper Specifications SpecificationsSpecifications and Description Printer Specifications80 % RH Overview Paper SpecificationsSupported Sizes of Paper Size mm/in.a Weight Capacityb60 to 120 g/m2 bond 16 to 32 lb Maximum size Legal Symptom Problem with Solution Paper Guidelines for Using PaperOutput Tray Capacity Paper SpecificationsCategory Specifications Paper Output CapacityPrinter and Paper Storage Environment Index USB cable, connect Software User’s Guide Installing Printer Software in Windows Sharing the Printer Locally Installing Printer Software in Windows Installing Printer Software in WindowsChanging the Software Language Choose the type of installationRemoving Printer Software Reinstalling Printer SoftwareBasic Printing Printing a DocumentSelect your printer driver from the Name drop-down list Layout Options Printer SettingsLayout Tab OrientationScaling Paper TabCopies SizeDarkness ResolutionToner Save Mode Graphics TabAbout Tab Extras TabPrinter Tab Using Help Using a Favorite SettingPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting a Reduced or Enlarged Document Printing PostersUsing an Existing Watermark Using WatermarksFitting Your Document to a Selected Paper Size Watermark section. The Edit Watermark window appears Creating a WatermarkEditing a Watermark Deleting a WatermarkWhat is an Overlay? Using OverlaysCreating a New Page Overlay Deleting a Page Overlay Using a Page OverlayClick Delete Overlay Windows NT 4.0 or higher Setting Up a Host ComputerSetting Up a Client Computer Windows 9x/Me→ your printer driver name → Troubleshooting Guide Installing Status MonitorOpening the Troubleshooting Guide Using Status MonitorFollowing window opens Changing the Status Monitor Program SettingsRecommended Capacities Using Your Printer in LinuxSystem Requirements Supported OSInstalling the Printer Driver Changing the Printer Connection Method Uninstalling the Printer Driver Using the Configuration ToolSelect Complete uninstall and then click Uninstall Changing Llpr Properties Language, change 4 Layout properties, set Rev.1.00
Top Page Image Contents