Samsung ML-1610 manual Reinstalling Printer Software, Removing Printer Software

Page 86

Reinstalling Printer Software

You can reinstall the software if installation fails.

1Start Windows.

2From the Start menu select Programs or All Programs → your printer driver name → Maintenance.

Or place the CD-ROM into the CD-ROM drive.

3Select Repair.

You will see a component list so that you can reinstall any one item individually.

NOTE: If your printer is not already connected to the computer, the following window will appear.

•After connecting the printer, click Next.

•If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.

•The reinstallation window that appears in this User’s Guide may differ depending on the printer and interface in use.

4Select the components you want to reinstall and click Next.

If you select Printer, the window asking you to print a test page appears. Do as follows:

a.To print a test page, select the check box and click Next.

b.If the test page prints out correctly, click Yes. If it doesn’t, click No to reprint it.

5When the reinstallation is done, click Finish.

Removing Printer Software

1Start Windows.

2From the Start menu select Programs or All Programs → your printer driver name → Maintenance.

Or place the CD-ROM into the CD-ROM drive.

3Select Remove.

You will see a component list so that you can remove any one item individually.

4Select the components you want to remove and then click Next.

5When your computer asks you to confirm your selection, click Yes.

The selected driver and all of its components are removed from your computer.

6After the software is removed, click Finish.

5

Installing Printer Software in Windows

Image 86

Contents ML-1610 Series About the User’s Guide Contents Cleaning the Outside Cleaning the Inside Redistributing Toner Replacing the Toner CartridgeImportant Precautions and Safety Information 17SAVE These Instructions Environmental and Safety Consideration Ozone Safety Radio Frequency Emissions Declaration of Conformity European Countries Page Introduction Up to 16 ppm in A4 17 ppm in Letter Special FeaturesYou can print at 600 dots per inch dpi You can print in Windows 98/Me/2000/XPPrinter Driver Features Feature Printer DriverPrinter Components Front ViewRear View Understanding the Control Panel On Line/Error and Toner Save LEDsSee Troubleshooting Error Messages on DescriptionCancel button Function DescriptionSetting Up Your Printer Components may differ from one country to another UnpackingPaper Cover a Clearance Space Selecting a LocationCarefully remove all of packing tape from the printer Installing the Toner Cartridge Grasp the front cover and pull it toward you to openSetting UP Your Printer Setting UP Your Printer Loading Paper You can load approximately 150 sheets of paper in the trayLoad paper with the print side facing up Connecting a Printer Cable Turning the Printer on Demo page shows the printer’s current configuration Printing a DemoVarious Linux See Software User’s Guide Installing Printer SoftwareSystem Requirements Setting UP Your Printer Using Print Materials Choosing Paper and Other Materials Paper Type Input Source/Capacitya Paper Tray Manual Feed Type, Input Sources and CapacitiesGuidelines for Paper and Special Materials Plain paperOnly use labels recommended for laser printers Using Print Materials Using the Tray Verifying the Output LocationUsing Manual Feed Mode Repeat this step for every page to be printedPrinting on Special Materials Using Print Materials Press the Cancel button on the control panel Canceling a Print JobThere are two ways to cancel a print job Double-click this icon to view Queue of the print jobs Maintaining Your Printer Maintaining the Toner Cartridge Toner cartridge storageRedistributing Toner Maintaining Your Printer Using the Toner Save Mode Replacing the Toner CartridgeCleaning the Inside Cleaning the PrinterCleaning the Outside Cleaning inside the printer Maintaining Your Printer Transfer Roller Consumables and Replacement PartsItems Yield Average Pick-up RollerSolving Problems Line/Error LED is on Troubleshooting ChecklistCheck Solution Solving General Printing Problems Problem Possible Cause SolutionSoftware User’s Guide. Try printing a But are blank Defective or out Toner Text is wrongGarbled, or Clearing Paper Jams Paper Exit AreaSolving Problems Paper Feed Area Around the Toner Cartridge Tips for Avoiding Paper Jams Solving Print Quality ProblemsPrint Quality Checklist Solving Print Quality Problems Print4.6. Contact your service representative Scratched. Install a new toner cartridgeDirty. Clean the LSU. See Cleaning the Inside on Change to a lighter weight pages. See PaperProblem Solution Wrinkles or Black pagesCurl Poor Image qualityToner cartridge and install a new one. See Troubleshooting Error MessagesLED pattern Possible Problems and Solutions File in Use message Common Windows ProblemsProblem Possible Cause and Solution Appears duringCommon Linux Problems /etc/printcap fileThat would result in a cropped output Memory usage Am trying to print aRotated and cropped White nothing isYour software vendor to inform them of the issue Errors Owning the spooler daemon On my PCL or SPLError messages printing Able to printSpecifications Printer Specifications Paper Specifications80 % RH Printer SpecificationsSpecifications and Description Paper Specifications Overview60 to 120 g/m2 bond 16 to 32 lb Maximum size Legal Size mm/in.a Weight CapacitybSupported Sizes of Paper Guidelines for Using Paper Symptom Problem with Solution PaperPaper Output Capacity Paper SpecificationsCategory Specifications Output Tray CapacityPrinter and Paper Storage Environment Index USB cable, connect Software User’s Guide Installing Printer Software in Windows Sharing the Printer Locally Installing Printer Software in Windows Installing Printer Software in WindowsChoose the type of installation Changing the Software LanguageReinstalling Printer Software Removing Printer SoftwareSelect your printer driver from the Name drop-down list Printing a DocumentBasic Printing Orientation Printer SettingsLayout Tab Layout OptionsSize Paper TabCopies ScalingGraphics Tab ResolutionToner Save Mode DarknessPrinter Tab Extras TabAbout Tab Using a Favorite Setting Using HelpAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing a Reduced or Enlarged DocumentFitting Your Document to a Selected Paper Size Using WatermarksUsing an Existing Watermark Deleting a Watermark Creating a WatermarkEditing a Watermark Watermark section. The Edit Watermark window appearsCreating a New Page Overlay Using OverlaysWhat is an Overlay? Click Delete Overlay Using a Page OverlayDeleting a Page Overlay Windows 9x/Me Setting Up a Host ComputerSetting Up a Client Computer Windows NT 4.0 or higherUsing Status Monitor Installing Status MonitorOpening the Troubleshooting Guide → your printer driver name → Troubleshooting GuideChanging the Status Monitor Program Settings Following window opensSupported OS Using Your Printer in LinuxSystem Requirements Recommended CapacitiesInstalling the Printer Driver Changing the Printer Connection Method Select Complete uninstall and then click Uninstall Using the Configuration ToolUninstalling the Printer Driver Changing Llpr Properties Language, change 4 Layout properties, set Rev.1.00