PCL
This menu sets the PCL emulation configuration. You can set the font type, symbol type, lines per page, and point size.
Item | Explanation |
|
|
Typeface | Values: PCL1 ~ PCL54 |
|
You can select the standard font to be used in PCL emulation.
•PCL1~PCL7’s interval between letters is fixed, and PCL8~PCL45’s interval is proportional to the font type and point size. You can adjust the font size of PCL1~PCL7 using the Pitch item, and PCL8~PCL45 can do using Point Size item.
•PCL46~PCL54’s interval and point size are fixed.
Symbol | Values: ROMAN8 ~ PCCYRIL |
|
This item selects the symbol to be used in PCL emulation. The symbol is the group of numbers, marks, and special signs being used when printing letters.
Point Size | Values: 4.00 ~ 999.75 (0.25 unit) |
|
When you select one between PCL8 and PCL45 from the Typeface menu, you can determine the font size by setting the height of the characters in the font.
Courier | Values: Regular, Dark |
|
This item lets you select the version of Courier font to use.
Pitch
Values: 0.44 ~ 99.99 (0.01 unit)
When you select one between PCL1 and PCL7 from the Typeface menu, you can determine the font size by setting the number of characters that will print in one horizontal inch of type. The default value, 10 is the best size.
Lines | Values: 5 ~ 128 |
|
This item allows you to set vertical spacing from 5 to 128 lines for the default paper size. The lines may differ according to the paper size and printing orientation.
PostScript
This menu provides you with the Print PS Error menu item.
Item | Explanation | |
|
| |
Print PS | Values: On, Off | |
Error | ||
|
You can select whether or not your printer prints an error list when a PS error occurs.
•Select On to print PS 3 emulation errors. If an error occurs, the job stops processing, the error message prints, and the printer flushes the job.
•If this menu is set to Off, the job is flushed without an indication of the error.
EPSON
This menu sets the EPSON emulation configuration.
Item | Explanation |
|
|
Font
Values: SANSERIF, ROMAN
You can select the standard font will be used in
EPSON emulation.
Character | Values: USA, FRANCE, GERMANY, UK, | |
Set | ||
DENMARK1, SWEDEN, ITALY, SPAIN1, JAPAN, | ||
| NORWAY, DENMARK2, SPAIN2, LATIN |
This item allows you to select a character set of the desired language.
Character | Values: ITALIC, PC437US, PC850 | |
Tab. | ||
| ||
| This item selects the character set. | |
Pitch | Values: 10, 12, 17, 14, 20 | |
|
You can determine the font size by setting the number of characters that will print in one horizontal inch of type.
LPI | Values: 6, 8 |
|
You can set the number of lines printed in one vertical inch.
Auto | Values: Off, On | |
Wrap | ||
|
This item determines whether or not the printer automatically performs line feed when the data overflows the printable area of the print material.
2.5 <System setup>