Samsung ML-4050N manual Layout menu, Paper menu

Layout menu

Use the Layout menu to define all settings relating to output.

Item		Explanation
Orientation	Choose the default orientation of the print image
	on the page.

Portrait Landscape

Simplex	Set the margin of print materials for one-sided
Margin	printing. You can increase or decrease the value in
	0.1 mm increments.

•Top Margin: Set the top margin.

•Left Margin: Set the left margin.

Duplex	To print on both sides of paper, choose the binding
	edge as follows.

•Long Edge: Flip on the long edge.

•Short Edge: Flip on the short edge.

		2
	3
2	5	3
		5

Long Edge in the	Long Edge in the
Portrait orientation	Landscape orientation

2
	3
2	5
3
5

Short Edge in the	Short Edge in the
Portrait orientation	Landscape orientation

Select Off to print on one side of the paper.

Note

• This menu item is available when the optional duplex unit is installed.

Item		Explanation
Duplex	In this menu, you can set the margins for double-
Margin	sided printing. You can increase or decrease the
	value in 0.1 mm increments.
	•	Top Margin: Set the top margin.
	•	Left Margin: Set the left margin.
	•	Short Binding: Set the bottom margin of the
		back of the page for short binding.
	•	Long Binding: Set the right margin of the back
		of the page for long binding.
		Note
		• This menu item is available when the
		optional duplex unit is installed.

Paper menu

Use the Paper menu to define all settings relating to print materials such as paper feed and exit, as well as size and type the specific print materials you are using with your printer.

Item		Explanation
Copies	Set the default number of copies by selecting any
	number from 1 to 999.
Paper Size	Depending on the paper source or duplex setting,
	available options vary.
	Select the paper size currently loaded in the tray.
Paper Type	Select the paper type currently loaded in the tray.
Paper	Select which tray you want to use.
Source	•	If you select Auto, the printer can automatically
		determine the source.
	•	Select MP Tray or Manual Feeder to use the
		multi-purpose tray. If you select Manual Feeder,
		you need to press OK each time you print a
		page.
	•	Tray 2, Tray 3, or Tray 4 is available only when
		the corresponding tray is installed.
Tray	When you select any other value except Auto from
Chaining	Paper Source and the selected tray is empty, you
	can set the printer automatically to print from other
	trays.
	If this menu item is set to Off, the default LED lights
	red and the printer doesn’t work until you insert
	paper into the specified tray.

2.3 <System setup>