Samsung ML-4050N manual Using Windows PostScript Driver, Advanced

Page 93

4 Using Windows PostScript Driver

If you want to use the PostScript driver provided with your system CD-ROM to print a document.

PPDs, in combination with the PostScript driver, access printer features and allow the computer to communicate with the printer. An installation program for the PPDs is provided on the supplied software CD-ROM.

This chapter includes:

Printer Settings

You can use the printer properties window, which allows you to access all of the printer options you need when using your printer. When the printer properties are displayed, you can review and change the settings needed for your print job.

Your printer properties window may differ, depending on your operating system. This Software User’s Guide shows the Properties window for Windows XP.

Your printer driver Properties window that appears in this User’s Guide may differ depending on the printer in use.

NOTES:

•Most Windows applications will override settings you specify in the printer driver. Change all print settings available in the software application first, and change any remaining settings using the printer driver.

•The settings you change remain in effect only while you are using the current program. To make your changes permanent, make them in the Printers folder.

•The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help.

1.Click the Windows Start button.

2.Select Printers and Faxes.

3.Select your printer driver icon.

4.Right-click on the printer driver icon and select Printing Preferences.

5.Change the settings on each tab, click OK.

Advanced

You can use advanced settings by clicking the Advanced button.

•Paper/Output this option allows you to select the size of the paper loaded in the tray.

•Graphic this option allows you to adjust the print quality for your specific printing needs.

•Document Options this options allow you to set the PostScript options or printer features.

Using Help

You can click from the upper right corner of the window, and then click on any setting.

23

Using Windows PostScript Driver

Image 93

Contents Page Page Country Customer Care Center Web Site Contact Samsung World WideContents Troubleshooting Installing accessoriesSpecifications Important Precautions and Safety Information Safety and Regulatory InformationEnvironmental and Safety Consideration Laser Safety StatementPower Saver Ozone SafetyRecycling Radio Frequency EmissionsDeclaration of Conformity European Countries United States of AmericaWireless Guidance Regulatory Compliance StatementsReplacing the Fitted Plug for UK Only D e c la r a tio n o f Co n fo r m ity R & T T E Introduction Special featuresYou can print in Windows 98/Me/NT 4.0/2000/XP 2003/VistaMacintosh Front view Printer overviewControl panel overview Finding more informationClearance space Selecting a locationSystem setup Using control panel menusAccessing control panel menus Menu overview Job manager menuInformation menu Paper menu Layout menuGraphic menu System Setup menuPostScript Emulation menuUsing toner save mode Printing a demoChanging the display language Supplied software Software overviewPrinter driver features System requirementsWindows Linux MacintoshRequirements Network setup Via network administration programsVia the control panel Configuring EtherTalk Configuring TCP/IPDynamic addressing BOOTP/DHCP Supported operating systemsSetting Ethernet speed Configuring IPX frame typesRestoring the network configuration Printing a network configurationSelecting print media Loading print mediaType Size Weight Type Size Dimensions Weighta CapacitybSupported sizes of paper Print media for duplex printingGuidelines for selecting and storing print media Guidelines for special print mediaMedia type Guidelines Loading paper Changing the size of the paper in the tray Using the standard tray or the optional traysLoad the paper with the side to be printed on facing up Using the multi-purpose trayTips on using the multi-purpose tray Using manual feed modeSelecting an output location Printing to the output tray Face downPrinting to the rear cover Face up Printing a document Canceling a print job Canceling a print jobBasic printing Printing a documentOrdering supplies and accessories AccessoriesToner cartridges How to purchase Cleaning the printer MaintenanceCleaning the outside of the printer Cleaning the inside of the printerPTL lens Maintaining the toner cartridge Checking the remaining tonerRedistributing toner cartridge Replacing the toner cartridge Maintenance Items Yield Average Maintenance partsClearing paper jams TroubleshootingPaper feed area TrayOptional tray Multi-purpose tray Around the toner cartridgePaper exit area Duplex unit areaDuplex jam Troubleshooting checklist Condition Suggested solutionsTips for avoiding paper jams Understanding display messages Understanding the status LEDLow Heat Error Message Meaning Suggested solutions LoadLSU Motor Error OPC is CleaningToner cartridge-related messages Solving general printing problems Spool Settings button Settings and Printers. RightClick the Samsung ML-4050 Series PCL 6 printer iconSolving print quality problems Condition Suggested solutions Curl or wave Condition Suggested solutions VerticalRepetitive DefectsCommon PostScript problems Common Windows problemsCommon Macintosh problems Common Linux problemsInstallable Options section to InstalledPrecautions when installing accessories Installing accessoriesInstalling a memory Dimm Disconnect the power cordSetting the memory in the PostScript printer properties Removing a Dimm Installing a wireless network interface cardConfiguring the wireless network parameters Selecting the authentication typeConfiguring basic network settings Installing the hard disk Using the hard diskSetting Encryption Restoring default values for wireless networkingSetting the time and date Setting the hard disk in the printer propertiesPrinting with the optional hard disk Storing a jobDeleting a stored job Printing a stored jobControlling the active job queue To delete a file from the queuePrinting using the form files To promote a file from the queueTo print a file immediately Specifications Printer specificationsSpecifications and Description Index System requirements Linux 3.3 Macintosh 3.3 Windows Software section Contents Using Windows Postscript Driver Using Your Printer in Linux Installing Printer Software Installing Software for Local PrintingTypical Installation Select Typical installation for a local printer. Click Next Custom InstallationSelect the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Custom Installation Select Custom installation. Click Next Changing the Software Language Reinstalling Printer SoftwareRemoving Printer Software Select the components you want to reinstall and click NextSelect your printer driver from the Name drop-down list Printing a DocumentPrinter Settings Layout TabPaper Orientation Paper Tab SourceScaling Printing Resolution Image ModeToner Save Mode Graphics TabJob Setting On the Job SettingExtras Tab Using Help Using a Favorite SettingAbout Tab Printer TabPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersPrinting a Reduced or Enlarged Document Printing on Both Sides of PaperFitting Your Document to a Selected Paper Size NoneUsing an Existing Watermark Using WatermarksCreating a Watermark Editing a WatermarkWhat is an Overlay? Using OverlaysUsing a Page Overlay Creating a New Page OverlayAdvanced Using Windows PostScript DriverUsing the right-click menu Using the shortcut iconOverview Direct Print Utility PrintingSetting Up a Client Computer Setting Up a Host ComputerCheck the Share this printer box Select Local Port and click New PortPrinter Setting Troubleshooting GuideUnderstanding Smart Panel Toner LevelChanging the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Click Uninstall Uninstalling the Unified Linux DriverPrinters Configuration Using the Unified Driver ConfiguratorOpening the Unified Driver Configurator Double-clickUnified Driver Configurator on the desktopConfiguring Printer Properties Ports ConfigurationClasses Tab Printing from Applications Printing FilesFile menu Click Continue Installing Software for MacintoshFor a Network-connected Macintosh Setting Up the PrinterFor a USB-connected Macintosh Mac OS 8.6 ~Changing Printer Settings Layout SettingPrinting a Document ResolutionQuality Printer Features SettingPrinting Multiple Pages on One Sheet of Paper Reverse DuplexDuplex Printing Index Resolution Macintosh 36 Windows GGGGGGGGGGGGGRev.1.01