Samsung ML-4050N Printing with the optional hard disk, Setting the time and date, Storing a job

4Align the connector on the hard disk with the connector on the control board. Push the hard disk in until it is latched into place.

5Fasten the four screws supplied with your new hard disk.

6Close the control board cover by aligning the groove on it with the notch on the printer and sliding it.

7Reinstall the duplex-slot cover or the duplex unit.

8Reconnect the power cord and printer cable, and turn the printer on.

9Print a configuration page from the control panel to check if the hard disk is correctly installed. See page 8.1.

Setting the hard disk in the printer properties

After installing the hard disk, you need to select it in the printer properties to enable its use. Take the following steps:

1Click the Windows Start menu.

2For Windows 98/Me/NT 4.0/2000, select Settings and then Printers.

For Windows XP/2003, select Printers and Faxes.

For Windows Vista, select Control Panel → Hardware and Sound → Printers.

3Select the Samsung ML-4050 Series PCL 6 printer icon or Samsung ML-4050 Series PS printer icon.

4Click the right mouse button on the printer icon and select Properties.

5In PCL 6 Properties, click the Printer tab and then check Optional Hard Disk Drive (HDD).

In PS Properties, click the Device Option or Device Settings tab and set the Optional Hard Disk Drive (HDD) option to Installed.

6Click OK.

Printing with the optional hard disk

After installing the optional hard disk, you can use advanced printing features, such as storing or spooling a print job to the hard disk, proofing a job, and specifying of printing a private job in the printer properties window.

Once you have stored files in the hard disk, you can easily print or delete the stored files using the control panel of your printer.

Setting the time and date

1Press Menu until System Setup appears on the bottom line of the display and press OK.

2Press OK when Date & Time appears.

3Press the Scroll buttons until the digit you want appears and press OK.

You can enter from 2000 to 2065 in the year input section. The cursor moves to the next position.

4Repeat step 3 until all digits appear correctly.

5Press OK.

Storing a job

You can store jobs in the installed hard disk.

1Open the file you want to store.

2Select Print from the File menu. The Print window displays.

10.6 <Installing accessories>