Samsung ML-5200A manual Cleaning the printer, Cleaning the outside, Cleaning the inside

Page 53

03-Maintenance 3/2/00 9:20 AM Page 4

Cleaning the printer

This section contains some general guidelines for keeping your printer clean. When you clean the printer, keep the followings in mind.

Do not use ammonia-based sprays or volatile solvents such as thinner to clean the printer, as these can damage the printer surface.

Keep the front cover closed when cleaning the outside of the printer.

Always unplug the power cord before cleaning the inside of the printer.

Cleaning the outside

Wipe the outside surfaces of the printer with a soft, clean, and lint-free cloth. You can dampen the cloth slightly with water, but be careful not to let any water drip inside.

Cleaning the inside

When a black line or spot occurs on the printed paper, it means that the toner cartridge is contaminated by the toner particle. You can solve this problem by cleaning the toner cartridge.

1.Press and hold the button on the control panel for about 2 seconds while the READY lights is on. All the lights blinks in turn.

ERROR PAPER READY

2.When the lights turn off, release the button. The machine automatically pulls in a sheet of paper and prints.

If the printer still has the same problem after cleaning, replace the toner cartridge. See the page 3.3.

3.2 Maintenance

Image 53
Contents ML-5200A Page Contents Maintenance Setting up your printer Selecting a location UnpackingFront view Understanding the printer partsRear view Installing the toner cartridge Handle Insert the paper in the automatic paper feeder Loading paperOutput lever Paper guideUsing parallel port Connecting the printer to your computerUsing USB port Attaching the power cord Printing a test System requirement Software installationInstalling printer driver Windows 95/98/NT4.0 installation Windows 95/98 plug and play Windows 3.1x installation Installing the USB port driver Installing printer utilitiesDOS prompt C\, type xcopy d\5200\eng\rcp\*.* c\prtutil Installing RCP only for Dos usersMaking an installation diskette Uninstalling printer driver Operating your printer All lights Indicator lightsControl Panel Button function Type Size Feed Source Capacity Selecting paper type and feed sourceLoading a stack of paper Place the print side facing you Operating your printer Adjust the paper guides to the width of the print material Automatic paper feeder Manual paper feeder Using the manual paper feederFace-up output slot may not hold the printed pages properly Paper guidelines Windows Selecting your printerWindows 95 / 98 / NT Printing a document PCL 6 printer driver Print settingsPaper tab Graphics tab Output tab Overlay tab Watermark tab PCL 5e printer driverBasic tab Information tab Printing on network printer Setting Up Host PC PrinterClient PC Sharing Setup Remote Control Panel only for DOS users Printer Font About Maintenance Resetting the printer Cleaning the inside Cleaning the printerCleaning the outside Replacing the toner cartridge Managing the toner cartridgeTake the following steps to replace the toner cartridge Maintenance Adding printer memory Pin Metal clip Memory CardMetal clip Memo Troubleshooting Paper jam in input area Clearing paper jamsPaper jam in output area Paper jam inside the printer Tips for avoiding paper jams Printer problems Fixing problemsPrintout does not match Insufficient memoryPaper size Half of the page is blankPrint quality problems Unexpected characters or Background scatterMissing character Back of printout dirtyPaper problems Envelopes do not feed Transparencies orRepeated paper jams OccurBefore you call service Appendix Canadian radio interference regulations FCC regulationsEC declaration of conformity Laser safety statement Product Safety Safety informationSpecifications Index Appendix 3/2/00 908 AM Electronics