Samsung ML-5200A manual Loading paper, Insert the paper in the automatic paper feeder

01-Setup 3/2/00 9:43 AM Page 8

Loading paper

For best results, use high quality 75g/m2 (20 lb) photocopy paper.

Note: For more information on loading paper and other print material, refer to ‘Loading a stack of paper’ on page 2.4.

1. Pull the paper tray on the automatic paper feeder up until it stops.

2.Before loading the paper, flex the sheets back and forth to loosen and fan. Tap the edges on a table top to straighten. Doing this before you load paper helps prevent paper jams.

Do not over fill the feeder. The feeder holds up to 150 sheets.

3.Insert the paper in the automatic paper feeder.

If the paper has a preferred print side, place the print side towards you. Load letter-head paper facing you, with the top of the sheet toward the printer.

1.6 Setting up your printer