Samsung ML-3470 Series Printing on Both Sides of Paper, Printing a Reduced or Enlarged Document

Page 84

Printing on Both Sides of Paper

You can print on both sides of a sheet of paper. Before printing, decide how you want your document oriented.

The options are:

•Printer Setting, if you select this option, this feature is determined by the setting you’ve made on the control panel of the printer. If this option does not appear, your printer does not have this feature.

•None

•Long Edge, which is the conventional layout used in book binding.

•Short Edge, which is the type often used with calendars.

Printing a Reduced or Enlarged Document

You can change the size of a page’s content to appear larger or smaller on the printed page.

1To change the print settings from your software

application, access printer properties. See “Printing a Document” on page 12.

2From the Paper tab, select Reduce/Enlarge in the Printing Type drop-down list.

3Enter the scaling rate in the Percentage input box.

You can also click the

or

button.

4 Select the paper source, size, and type in Paper Options.

 

 

 

2

2

3

5

3

 

 

5

 

 

 

▲Long Edge

2

 

3

2

5

3

 

5

 

▲Short Edge

5 Click OK and print the document.

Fitting Your Document to a Selected Paper Size

• Reverse Duplex Printing, allows you to select general

 

print order compare to duplex print order. If this option

 

does not appear, your printer does not have this

A

feature.

 

NOTE: If back of printouts are dirty, change the paper type to Recycled paper from Printer settings. see page 15.

NOTE: Do not print on both sides of labels, transparencies, envelopes, or thick paper. Paper jamming and damage to the printer may result.

1To change the print settings from your software

application, access printer properties. “Printing a Document” on page 12.

2From the Layout tab, select the paper orientation.

3From the Double-sided Printing section, select the binding option you want.

4Click the Paper tab and select the paper source, size, and type.

5Click OK and print the document.

NOTE: If your printer does not have a duplex unit, you should complete the printing job manually. The printer prints every other page of the document first. After printing the first side of your job, the Printing Tip window appears. Follow the on- screen instructions to complete the printing job.

20 Advanced Printing

This printer feature allows you to scale your print job to any selected paper size regardless of the digital document size. This can be useful when you want to check fine details on a small document.

1To change the print settings from your software

application, access printer properties. See “Printing a Document” on page 12.

2From the Paper tab, select Fit to Page in the Printing Type drop-down list.

3Select the correct size from the Output size drop-down list.

4Select the paper source, size, and type in Paper Options.

5Click OK and print the document.

Page 83 Page 85
Image 84
Page 83 Page 85
Contents Page Page Contact Samsung worldwide Spain Contents Ordering supplies and accessories MaintenanceTroubleshooting Installing accessoriesSafety and Regulatory Information Important Precautions and Safety InformationEnvironmental and Safety Consideration Laser Safety StatementOzone Safety Power SaverRecycling Radio Frequency EmissionsUnited States of America Declaration of Conformity European CountriesWireless Guidance Regulatory Compliance StatementsReplacing the Fitted Plug for UK Only Declaration of Conformity Special features Special features Printer overview Finding more informationIntroduction You can print in Windows 2000/XP/2003/VistaFeatures ML-3470D ML-3471ND Printer overviewFront view Rear view Control panel overviewML-3470D and ML-3471ND Understanding the Status LED Finding more informationAltitude adjustment Click Printer SettingSelecting a location Clearance spaceSystem setup Using control panel menusAccessing control panel menus Menu overviewInformation menu Layout menuSystem Setup menu Paper menuGraphic menu Emulation menu PostScriptUsing toner save mode Printing a demoChanging the display language Changing the font setting Software overview Supplied softwarePrinter driver features System requirementsWindows Linux MacintoshRequirements Via network administration programs Supported operating systemsVia the control panel Configuring TCP/IP Using SetIP programDynamic addressing BOOTP/DHCP Static addressingConfiguring EtherTalk Setting Ethernet speedRestoring the network configuration Printing a network configurationLoading print media Selecting print mediaType Size Dimensions Weighta Capacityb Supported sizes of paperGuidelines for selecting and storing print media Guidelines for special print mediaMedia type Guidelines Loading paper Using the tray 1 or the optional tray Changing the size of the paper in the trayUsing the multi-purpose tray Load the paper with the side to be printed on facing upUsing manual feed mode Tips on using the multi-purpose traySelecting an output location Printing to the output tray Face downPrinting to the rear cover Face up Canceling a print job Printing a document Canceling a print jobBasic printing Printing a documentOrdering supplies and accessories AccessoriesHow to purchase Toner cartridgesMaintenance Cleaning the printerCleaning the outside of the printer Cleaning the inside of the printerMaintaining the toner cartridge Checking the remaining tonerRedistributing toner cartridge Replacing the toner cartridgeToner Low appears on the display Open the front cover Pull the toner cartridge outMaintenance parts Clearing the Toner Low Replace Toner messageItems Yield Average Troubleshooting Clearing paper jamsPaper feed area TrayOptional tray Multi-purpose trayAround the toner cartridge Paper exit areaDuplex unit area Duplex jamTips for avoiding paper jams Troubleshooting checklist Understanding display messagesMessage Meaning Suggested solutions LSU Motor Error Open Heat ErrorOver Heat Error Self DiagnosticToner cartridge-related messages Solving general printing problems Select Download as Bit Image Advanced OptionsTurn on Print As Image from Solving print quality problems Scatter MisformedCharacters SkewCommon Windows problems Common PostScript problemsCondition Suggested solutions Curl Option through Printer Settings Utility or PrinterCommon Linux problems Common Macintosh problemsInstalling accessories Precautions when installing accessoriesInstalling a memory Dimm Disconnect the power cordInstalling a wireless network interface card Setting the memory in the PostScript printer propertiesSelect the Samsung ML-3470 Series printer Configuring the wireless network parameters Configuring basic network settingsSelecting the authentication type Setting EncryptionRestoring default values for wireless networking Hexadecimal AlphanumericSpecifications Printer specificationsPrinter specifications Specifications and DescriptionIndex Page Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Installing Printer Software Installing Software for Local PrintingTypical Installation Select Typical installation for a local printer. Click NextCustom Installation Select Custom installation. Click Next Select the components to be installed and click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Select the components you want to reinstall and click NextRemoving Printer Software NextPrinting a Document Select your printer driver from the Name drop-down listPrinter Settings Printing to a file PRNSelect Printers and Faxes Select your printer driver icon Layout Tab Paper TabPaper Orientation Image Mode Graphics TabSource Scaling PrintingExtras Tab Advanced OptionsWatermark OverlayUsing a Favorite Setting Using HelpAbout Tab Printer TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsPrinting on Both Sides of Paper Printing a Reduced or Enlarged DocumentFitting Your Document to a Selected Paper Size NoneUsing Watermarks Using an Existing WatermarkCreating a Watermark Editing a WatermarkUsing Overlays What is an Overlay?Using a Page Overlay Creating a New Page OverlayUsing Windows PostScript Driver AdvancedSetting Up a Host Computer Setting Up a Client ComputerCheck the Share this printer box Double-clickPrinters and FaxesUnderstanding Smart Panel Toner LevelOpening the Troubleshooting Guide Using Printer Settings UtilityChanging the Smart Panel Program Settings Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Uninstalling the Unified Linux Driver Click UninstallUsing the Unified Driver Configurator Printers ConfigurationOpening the Unified Driver Configurator Double-clickUnified Driver Configurator on the desktopConfiguring Printer Properties Ports ConfigurationClasses Tab Printing from Applications Printing FilesInstalling Software Installing the printer driverUninstalling the printer driver Printer driverSetting Up the Printer For a Network-connectedFor a USB-connected Mac OS 8.6 ~Changing Printer Settings PrintingPrinting a Document LayoutPrinter Features GraphicsPaper Printing Multiple Pages on One Sheet of Paper Duplex PrintingIndex Favorites 17 image mode 15 resolution GGGGGGGGGGGGGRev
Top Page Image Contents