Samsung ML-2240 Understanding the Control Panel, On-Line/Error LED, Toner LED, Cancel button

UNDERSTANDING THE CONTROL PANEL

The color of the On-Line/Error LED and toner LED indicates the machine's current status.

On-Line/Error LED

STATUS		DESCRIPTION
Green	On	The machine is warming up or ready to receive the
		data.
	Blinking	The machine is printing data.
Red	On	• The machine is experiencing an error, such as
		open cover, paper empty, installer error,
		or invalid error.
		• The machine is experiencing a service required
		error, such as LSU error, or fuser error. Contact
		your sales or service representative.
Orange	On	The machine is experiencing an error such as
		jammed paper.
Toner LED
STATUS		DESCRIPTION
Red	On	The toner is exhausted, machine will stop
		printing. Replace the toner cartridge.
	Blinking	The toner is low, replace the toner soon.
	Rapidly	The toner is empty, replace the toner.
	blinking

]

All printing errors will be appear in the Smart Panel program window.

Cancel button

STATUS	DESCRIPTION
Printing demo page	In ready mode, press and hold this
	button until the On-Line/Error LED
	blinks, and release.
Canceling print job	Press this button during printing. The
	red LED blinks while the print job is
	cleared from both the machine and
	the computer, and then the machine
	returns to ready mode. This may take
	some time depending on the size of
	the print job.
Manual print	Press this button during printing. The
	On Line/Error LED blinks while the
	print job is cleared from both the
	machine and the computer, and then
	return to ready mode. This may take
	some time depending on the size of
	the print job.
	In Manual Feed mode, you can’t
	cancel the print job by pressing this
	button.

14_Introduction