Samsung ML-3470D manual Paper menu, Graphic menu, System Setup menu

Paper menu

Use the Paper menu to define all settings relating to print material input and output, as well as the specific print material you are using with your printer.

Item		Explanation
Copies	Set the default number of copies by selecting any
	number from 1 to 999.
Paper Size	Select the paper size currently loaded in the tray.
Paper Type	Select the paper type currently loaded in the tray.
Paper	Using this item, you can set which tray you want to
Source	use.
	•	If you select Auto, the printer can automatically
		determine the source.
	•	Select MP Tray or Manual Tray to use the multi-
		purpose tray. If you select Manual Tray, you
		need to press OK each time you print a page.
	• Tray 2 is available only when an optional tray 2 is
		installed.
Tray	When you select any other value except Auto from
Chaining	Paper Source and the selected tray is empty, the
	printer automatically prints from other trays.
	If this menu item is set to Off, the printer does not
	work until you insert paper into the specified tray.

Graphic menu

Use the Graphic menu to change settings affecting the quality of the printed characters and images.

Item		Explanation
Resolution	Specify the number of dots printed per inch (dpi).
	The higher the setting, the sharper printed
	characters and graphics.
	•	If your print jobs are mostly text, select 600dpi-
		Normal for the highest quality printing.
	•	Select 1200dpi-Bestwhen your job contains
		bitmapped images, such as scanned photos or
		some graphics, that will benefit from enhanced
		line screening.
Darkness	You can lighten or darken the print on the page by
	changing the toner density setting. The Normal
	setting usually produces the best result. Use the
	Light toner density setting to save toner.
Image	This item enhances the print quality.
Enhance	•	Normal: Doesn’t enhance the quality.
	•	Text Enhance: Enhances letters and simple
		figures.

System Setup menu

Use the System Setup menu to configure a variety of printer features.

Item			Explanation
Language	This setting determines the language of the text
	that appears on the control panel display and
	information printing.
Power Save	When the printer does not receive data for an
	extended period of time, power consumption is
	automatically lowered. You can set how long the
	printer waits before going to power save mode.
Auto	This item determines whether or not the printer
Continue	continues printing when it detects the paper
	unmatched to your paper setting.
	•	Off: If a paper mismatch occurs, the message
		will remain on the display and the printer will
		wait until you insert the correct paper.
	•	On: If a paper mismatch occurs, an error
		message will display. The printer will wait for 20
		seconds, then automatically clear the message
		and continue printing.
Altitude Adj.	You can optimize print quality according to your
	altitude.
Auto CR	This item allows you to append the required
	carriage return to each line feed.
	Refer to the following samples:
			AA	AA
			BB	BB
			CC	CC
			LF	LF+CR
Job Timeout	You can set the length of time the printer waits
	before printing the last page of a print job that
	does not end with a command to print the page.
	When a print time-out occurs, the printer prints the
	page in the print buffer.

2.3 <System setup>