Samsung ML-3470D manual Emulation menu, PostScript

Item		Explanation
Maintenance	This item allows you to maintain your printer.
	•	Clean Drum: Cleans the OPC drum of the
		cartridge and produces a cleaning sheet with
		toner debris on it.
	•	Clean Fuser: Cleans the fuser unit inside of the
		printer and produces a cleaning sheet with
		toner debris on it.
	•	CLR Empty Msg.: Prevents the Toner Low
		Replace Toner message from appearing on the
		display. Once you have selected On, this
		setting will be permanently written to the
		memory of the toner cartridge, and this menu
		will be disappeared from the Maintenance
		menu.
	• Supplies Life: This item allows you to check how
		many pages are printed and how much toner
		are left in the cartridge.
Clear Setting	This menu item allows you to restore the printer’s
	factory default settings.

Emulation menu

Use the Emulation menu to configure printer language emulation.

Item	Explanation
Emulation	The printer language defines how the computer
Type	communicates with the printer.
	If you select Auto, your printer can change the
	printer language automatically.
Setup	See the tables on page 2.4 to configure the printer
	language.

PCL

This menu sets the PCL emulation configuration. You can set the font type, symbol type, lines per page, and point size.

Item		Explanation
Typeface	You can select the standard font to be used in PCL
	emulation.
	•	PCL1~PCL7’s interval between letters is fixed, and
		PCL8~PCL45’s interval is proportional to the font
		type and point size. You can adjust the font size of
		PCL1~PCL7 using the Pitch item, and
		PCL8~PCL45 can do using Point Size item.
	•	PCL46~PCL54’s interval and point size are fixed.

Item	Explanation
Symbol	This item selects the symbol to be used in PCL
	emulation. The symbol is the group of numbers,
	marks, and special signs being used when printing
	letters.
Point Size	When you select one between PCL8 and PCL45 from
	the Typeface menu, you can determine the font size by
	setting the height of the characters in the font.
Courier	This item lets you select the version of Courier font to
	use.
Pitch	When you select one between PCL1 and PCL7 from
	the Typeface menu, you can determine the font size by
	setting the number of characters that will print in one
	horizontal inch of type. The default value, 10 is the
	best size.
Lines	This item allows you to set vertical spacing from 5 to
	128 lines for the default paper size. The lines may
	differ according to the paper size and printing
	orientation.

PostScript

This menu provides you with the Print PS Error menu item.

Item	Explanation
Print PS	You can select whether or not your printer prints an
Error	error list when a PS error occurs.
	• Select On to print PS 3 emulation errors. If an error
	occurs, the job stops processing, the error message
	prints, and the printer flushes the job.
	• If this menu is set to Off, the job is flushed without an
	indication of the error.

EPSON

This menu sets the EPSON emulation configuration.

Item	Explanation
Font	You can select the standard font will be used in
	EPSON emulation.
Character	This item allows you to select a character set of the
Set	desired language.
Character	This item selects the character set.
Tab.
Pitch	You can determine the font size by setting the number
	of characters that will print in one horizontal inch of
	type.

2.4 <System setup>