Samsung ML-3470D Replacing the toner cartridge, Toner Low Replace Toner appears on the display

Page 41

Note

If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

4Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the printer.

5Tabs on the sides of the cartridge and corresponding grooves within the printer will guide the cartridge into the correct position until it locks into place completely.

6Close the front cover. Make sure that the cover is securely closed.

Replacing the toner cartridge

When the toner cartridge is completely empty:

•Toner Low Replace Toner appears on the display.

•The Smart Panel program window appears on the computer telling you that the toner cartridge is empty.

•The Status LED blinks red.

At this stage, the toner cartridge needs to be replaced. For order information for toner cartridges, see page 7.1.

1Open the front cover.

2Pull the toner cartridge out.

3Remove the new toner cartridge from its bag.

Caution

Do not use sharp objects, such as a knife or scissors, to open the toner cartridge package. They might scratch the drum of the cartridge.

4Remove the packing tape and roll the cartridge 5 or 6 items to distribute the toner.

Thoroughly roll the cartridge to assure maximum copies per cartridge. Save the box and the plastic bag for shipping.

Cautions

• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

•To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.

•Do not touch the green surface underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.

5Hold the toner cartridge by the handle and slowly insert the cartridge into the opening in the printer.

6Tabs on the sides of the cartridge and corresponding grooves within the printer will guide the cartridge into the correct position until it locks into place completely.

7Close the front cover. Make sure that the cover is securely closed.

8.4 <Maintenance>

Image 41

Contents Page Page Contact Samsung worldwide Slovakia Contents Maintenance Ordering supplies and accessoriesTroubleshooting Installing accessoriesImportant Precautions and Safety Information Safety and Regulatory InformationEnvironmental and Safety Consideration Laser Safety StatementPower Saver Ozone SafetyRecycling Radio Frequency EmissionsDeclaration of Conformity European Countries United States of AmericaReplacing the Fitted Plug for UK Only Wireless GuidanceRegulatory Compliance Statements Special features Printer overview Finding more information Special featuresIntroduction Software SectionFront view Features ML-3470D ML-3471NDPrinter overview ML-3470D and ML-3471ND Rear viewControl panel overview Finding more information Understanding the Status LEDClick Printer Setting Altitude adjustmentSelecting a location Clearance spaceUsing control panel menus System setupAccessing control panel menus Menu overviewLayout menu Information menuGraphic menu System Setup menuPaper menu PostScript Emulation menuChanging the display language Using toner save modePrinting a demo Changing the font setting Printer Settings Utility This program is ContentsSoftware overview Supplied softwareFeature Printer driver featuresSystem requirements WindowsRequirements LinuxMacintosh Via the control panel Via network administration programsSupported operating systems Using SetIP program Configuring TCP/IPDynamic addressing BOOTP/DHCP Static addressingSetting Ethernet speed Configuring EtherTalkRestoring the network configuration Printing a network configurationSelecting print media Loading print mediaSupported sizes of paper Type Size Dimensions Weighta CapacitybMedia type Guidelines Guidelines for selecting and storing print mediaGuidelines for special print media Loading paper Changing the size of the paper in the tray Using the tray 1 or the optional trayLoad the paper with the side to be printed on facing up Using the multi-purpose trayTips on using the multi-purpose tray Using manual feed modePrinting to the rear cover Face up Selecting an output locationPrinting to the output tray Face down Printing a document Canceling a print job Canceling a print jobBasic printing Printing a documentAccessories Ordering supplies and accessoriesHow to purchase Toner cartridgesCleaning the printer MaintenanceCleaning the outside of the printer Cleaning the inside of the printerMaintaining the toner cartridge Redistributing toner cartridge Checking the remaining tonerSaving Toner Toner Low appears on the displayToner Low Replace Toner appears on the display Replacing the toner cartridgeItems Yield Average Maintenance partsClearing the Toner Low Replace Toner message Clearing paper jams TroubleshootingPaper feed area TrayMulti-purpose tray Optional trayPaper exit area Around the toner cartridgeDuplex jam Duplex unit areaTips for avoiding paper jams Understanding display messages Troubleshooting checklistOpen Heat Error Message Meaning Suggested solutions LSU Motor ErrorOver Heat Error Self DiagnosticToner cartridge-related messages Condition Possible cause Suggested solutions Solving general printing problemsSelect Samsung ML-3470 Software Section. TryTurn on Print As Image from Select Download as Bit ImageAdvanced Options Solving print quality problems Misformed ScatterCharacters SkewCommon PostScript problems Common Windows problemsCondition Suggested solutions Curl Option through Printer Settings Utility or PrinterCommon Macintosh problems Common Linux problemsPrecautions when installing accessories Installing accessoriesInstalling a memory Dimm Disconnect the power cordSetting the memory in the PostScript printer properties Installing a wireless network interface cardSelect Device Settings tab Select the Samsung ML-3470 Series printerConfiguring basic network settings Configuring the wireless network parametersSetting Encryption Selecting the authentication typeRestoring default values for wireless networking Hexadecimal AlphanumericPrinter specifications SpecificationsPrinter specifications Specifications and DescriptionIndex Page Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Installing Software for Local Printing Installing Printer SoftwareTypical Installation Select Typical installation for a local printer. Click NextCustom Installation Select Custom installation. Click Next Installing Software for Network Printing Custom Installation Installing Printer Software in Windows Select the components you want to reinstall and click Next Reinstalling Printer SoftwareNext Removing Printer SoftwareSelect your printer driver from the Name drop-down list Printing a DocumentSelect Printers and Faxes Select your printer driver icon Printer SettingsPrinting to a file PRN Paper Orientation Layout TabPaper Tab Graphics Tab Image ModeSource Scaling PrintingAdvanced Options Extras TabWatermark OverlayUsing Help Using a Favorite SettingAbout Tab Printer TabPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersPrinting a Reduced or Enlarged Document Printing on Both Sides of PaperFitting Your Document to a Selected Paper Size NoneUsing an Existing Watermark Using WatermarksCreating a Watermark Editing a WatermarkWhat is an Overlay? Using OverlaysUsing a Page Overlay Creating a New Page OverlayAdvanced Using Windows PostScript DriverSetting Up a Client Computer Setting Up a Host ComputerCheck the Share this printer box Double-clickPrinters and FaxesPrinter Setting Troubleshooting GuideUnderstanding Smart Panel Toner LevelUsing Printer Settings Utility Opening the Troubleshooting GuideChanging the Smart Panel Program Settings Using Onscreen Help FileGetting Started Installing the Unified Linux DriverInstalling the Unified Linux Driver Click Uninstall Uninstalling the Unified Linux DriverPrinters Configuration Using the Unified Driver ConfiguratorOpening the Unified Driver Configurator Double-clickUnified Driver Configurator on the desktopClasses Tab Configuring Printer PropertiesPorts Configuration Printing Files Printing from ApplicationsInstalling the printer driver Installing SoftwareUninstalling the printer driver Printer driverFor a Network-connected Setting Up the PrinterFor a USB-connected Mac OS 8.6 ~Printing Changing Printer SettingsPrinting a Document LayoutPaper Printer FeaturesGraphics Duplex Printing Printing Multiple Pages on One Sheet of PaperIndex Macintosh 32 uninstall Rev.6.00