Samsung ML-3470D manual Installing a wireless network interface card, Select Device Settings tab

Page 58

6Push the DIMM straight into the DIMM slot until it snaps into place. Make sure the latches fit over the notches located on either side of the DIMM.

7Replace the control board cover.

8Reconnect the power cord and printer cable, and turn the printer on.

Setting the memory in the PostScript printer properties

After installing the memory DIMM, you need to select it in the printer properties of the PostScript printer driver so that you can use it.

1Make sure that the PostScript printer driver is installed in your computer. To installing the PostScript printer driver, you need to select Custom and put a check mark on the PostScript printer driver. See the Software Section.

2Click the Windows Start menu.

3For Windows 2000, select Settings and then Printers. For Windows XP/2003, select Printers and Faxes.

For Windows Vista/2008, select Control Panel > Hardware and Sound > Printers.

For Windows 7, select Control Panel > Hardware and Sound > Devices and Printers.

For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers.

4Select the Samsung ML-3470 Series printer.

5Click the right mouse button on the printer icon and select Properties.

6Select Device Settings tab.

7Select the amount of memory you installed from Printer Memory in the Installable Option section.

8Click OK.

Installing a wireless network interface card

ML-3471NDis equipped with a network interface which allows you to use your printer on a network. You can also purchase a wireless network interface card to enable the use of the printer in wireless network environments

For order information, see page 7.1.

Review the precautions on page 10.1 and then follow this procedure to install the wireless network interface card in your printer.

1Turn the printer power off and unplug all cables from the printer.

2Grasp the control board cover and slide toward you to open it.

1

1 control board cover

3Align the connector on the wireless network interface card with the connector on the control board. Push the card firmly into the connector on the control board until it is completely and securely in place.

1

2

	1	connector
	2	wireless network
	2	interface card
		interface card

10.2 <Installing accessories>

Image 58

Contents Page Page Contact Samsung worldwide Slovakia Contents Troubleshooting Ordering supplies and accessoriesMaintenance Installing accessoriesEnvironmental and Safety Consideration Safety and Regulatory InformationImportant Precautions and Safety Information Laser Safety StatementRecycling Ozone SafetyPower Saver Radio Frequency EmissionsUnited States of America Declaration of Conformity European CountriesRegulatory Compliance Statements Wireless GuidanceReplacing the Fitted Plug for UK Only Introduction Special featuresSpecial features Printer overview Finding more information Software SectionPrinter overview Features ML-3470D ML-3471NDFront view Control panel overview Rear viewML-3470D and ML-3471ND Understanding the Status LED Finding more informationSelecting a location Altitude adjustmentClick Printer Setting Clearance spaceAccessing control panel menus System setupUsing control panel menus Menu overviewInformation menu Layout menuPaper menu System Setup menuGraphic menu Emulation menu PostScriptPrinting a demo Using toner save modeChanging the display language Changing the font setting Software overview ContentsPrinter Settings Utility This program is Supplied softwareSystem requirements Printer driver featuresFeature WindowsMacintosh LinuxRequirements Supported operating systems Via network administration programsVia the control panel Dynamic addressing BOOTP/DHCP Configuring TCP/IPUsing SetIP program Static addressingRestoring the network configuration Configuring EtherTalkSetting Ethernet speed Printing a network configurationLoading print media Selecting print mediaType Size Dimensions Weighta Capacityb Supported sizes of paperGuidelines for special print media Guidelines for selecting and storing print mediaMedia type Guidelines Loading paper Using the tray 1 or the optional tray Changing the size of the paper in the trayUsing the multi-purpose tray Load the paper with the side to be printed on facing upUsing manual feed mode Tips on using the multi-purpose trayPrinting to the output tray Face down Selecting an output locationPrinting to the rear cover Face up Basic printing Canceling a print jobPrinting a document Canceling a print job Printing a documentHow to purchase Ordering supplies and accessoriesAccessories Toner cartridgesCleaning the outside of the printer MaintenanceCleaning the printer Cleaning the inside of the printerMaintaining the toner cartridge Saving Toner Checking the remaining tonerRedistributing toner cartridge Toner Low appears on the displayReplacing the toner cartridge Toner Low Replace Toner appears on the displayClearing the Toner Low Replace Toner message Maintenance partsItems Yield Average Paper feed area TroubleshootingClearing paper jams TrayOptional tray Multi-purpose trayAround the toner cartridge Paper exit areaDuplex unit area Duplex jamTips for avoiding paper jams Troubleshooting checklist Understanding display messagesOver Heat Error Message Meaning Suggested solutions LSU Motor ErrorOpen Heat Error Self DiagnosticToner cartridge-related messages Select Samsung ML-3470 Solving general printing problemsCondition Possible cause Suggested solutions Software Section. TryAdvanced Options Select Download as Bit ImageTurn on Print As Image from Solving print quality problems Characters ScatterMisformed SkewCondition Suggested solutions Curl Common Windows problemsCommon PostScript problems Option through Printer Settings Utility or PrinterCommon Linux problems Common Macintosh problemsInstalling a memory Dimm Installing accessoriesPrecautions when installing accessories Disconnect the power cordSelect Device Settings tab Installing a wireless network interface cardSetting the memory in the PostScript printer properties Select the Samsung ML-3470 Series printerConfiguring the wireless network parameters Configuring basic network settingsRestoring default values for wireless networking Selecting the authentication typeSetting Encryption Hexadecimal AlphanumericPrinter specifications SpecificationsPrinter specifications Specifications and DescriptionIndex Page Software section Contents Using Windows Postscript Driver Using Your Printer with a Macintosh Typical Installation Installing Printer SoftwareInstalling Software for Local Printing Select Typical installation for a local printer. Click NextCustom Installation Select Custom installation. Click Next Installing Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Select the components you want to reinstall and click NextRemoving Printer Software NextPrinting a Document Select your printer driver from the Name drop-down listPrinting to a file PRN Printer SettingsSelect Printers and Faxes Select your printer driver icon Paper Tab Layout TabPaper Orientation Source Image ModeGraphics Tab Scaling PrintingWatermark Extras TabAdvanced Options OverlayAbout Tab Using a Favorite SettingUsing Help Printer TabAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsFitting Your Document to a Selected Paper Size Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document NoneCreating a Watermark Using WatermarksUsing an Existing Watermark Editing a WatermarkUsing a Page Overlay Using OverlaysWhat is an Overlay? Creating a New Page OverlayUsing Windows PostScript Driver AdvancedCheck the Share this printer box Setting Up a Host ComputerSetting Up a Client Computer Double-clickPrinters and FaxesUnderstanding Smart Panel Troubleshooting GuidePrinter Setting Toner LevelChanging the Smart Panel Program Settings Opening the Troubleshooting GuideUsing Printer Settings Utility Using Onscreen Help FileInstalling the Unified Linux Driver Installing the Unified Linux DriverGetting Started Uninstalling the Unified Linux Driver Click UninstallOpening the Unified Driver Configurator Using the Unified Driver ConfiguratorPrinters Configuration Double-clickUnified Driver Configurator on the desktopPorts Configuration Configuring Printer PropertiesClasses Tab Printing from Applications Printing FilesUninstalling the printer driver Installing SoftwareInstalling the printer driver Printer driverFor a USB-connected Setting Up the PrinterFor a Network-connected Mac OS 8.6 ~Printing a Document Changing Printer SettingsPrinting LayoutGraphics Printer FeaturesPaper Printing Multiple Pages on One Sheet of Paper Duplex PrintingIndex Macintosh 32 uninstall Rev.6.00