Samsung ML2165WXAA manual For the Dhcp method, For the Static method

Wireless network setup

Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network

configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static.

If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address.

•For the DHCP method

If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP).

•For the Static method

If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine.

For example,

If the computer’s network information is as shown follows: -IP address: 169.254.133.42

-Subnet Mask: 255.255.0.0

Then, the machine’s network information should be as below: -IP address: 169.254.133.43

-Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)

-Gateway: 169.254.133.1

9The Wireless Network Setting Complete window appears. Click Next.

10 When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next.

	If the Change PC Network Setting window appears, follow the steps in the
	window.
	Click Next if you are finished with the computer’s wireless network settings.
	If you set the computer’s wireless network to DHCP, it will take several
	minutes to receive the IP address.
11	Click Next when the Confirm Printer Connection window appears.
12	Select the components to be installed. Click Next.
13	After selecting the components, you can also change the machine name,
	set the machine to be shared on the network, set the machine as the
	default machine, and change the port name of each machine. Click Next.
14	After the installation is finished, a window asking you to print a test page
	appears. If you want to print a test page, click Print a test page.
	Otherwise, just click Next and go to step 16.
15	If the test page prints out correctly, click Yes.
	If not, click No to reprint it.

2. Using a network-connected machine 119