Samsung manual Turning the Printer On, Printing a Demo, For Network Printing CLP-600Nonly

Page 18

3Connect the other end of the cable to the USB port on your computer.

NOTE: To print using the USB interface, you must run Windows 98SE/Me/2000/2003/XP or Macintosh with OS 10.3 ~ 10.4.

For Network Printing (CLP-600Nonly)

You can attach your printer to a network using an Ethernet cable (UTP cable with RJ.45 connector). The CLP-600N has a built-in network interface card.

If you want to use the printer in both wired and wireless network environments, you need to install an optional wired/ wireless network interface card. Contact your Samsung dealer or the retailer where you bought the printer. We strongly recommend that the card be installed by a trained service professional.

Using an Ethernet Cable

1Make sure that both the printer and the computer are turned off.

2Plug one end of the Ethernet cable into the Ethernet

network port on the left rear of the printer.

To the network

LAN connection

3Plug the other end of the cable into a network LAN connection.

NOTE: After connecting the printer, you need to configure the network parameters on the control panel. See page 8.1. You can use the software supplied with the card. Refer to the Network Printer User’s Guide.

2.7

Setting Up Your Printer

Turning the Printer On

1Plug the power cord into the power receptacle on the left rear of the printer.

2Plug the other end into a properly grounded AC outlet and turn on the power.

CAUTION:

•Some parts inside of the printer may be hot when power is on, or after printing. Be careful not to burn yourself when working inside the printer.

•Do not disassemble the printer when it is turned on or plugged in. Doing so may give you an electric shock.

Printing a Demo Page

Print a demo page to make sure that the printer is operating correctly.

To print a demo page:

In ready mode, press and hold the On Line/Continue button ( ) on the control panel for 2 seconds to print a demo page.

A demo page showing the printer’s features and capabilities is printed.

Image 18

Contents Page Page Country Customer Care Center Web Site Contents Your printer’s embedded web page opens Configuring Network Parameters on the Control PanelReplacing Supplies Clearing Paper JamsImportant Precautions and Safety Information Recycling Regulatory Compliance Statements Replacing the Fitted Plug for UK Only Special Features IntroductionPrinter Components Front ViewRight Side View Printer software CD Setting Up Your PrinterUnpacking Components may differ from one country to anotherInstalling the Toner Cartridges Grip Loading Paper Load paper with the print side facing upSlide the tray back into the printer Changing the Size of the Paper in the Tray Connecting a Printer Cable For Local PrintingPrinting a Demo Using an Ethernet CableTurning the Printer On For Network Printing CLP-600NonlyInstalling the Printer Software Changing the Display LanguageSystem Requirements Win98SE Printer Driver FeaturesPrinter driver Feature First Watermark OverlayUnderstanding the Control Panel Using the Control PanelCancel button ButtonsButton Description Overview of Control Panel Menus Using Control Panel Menus CLPAccessing Control Panel Menus Information MenuSetup Menu Color MenuPrinter Menu Network Menu Configuration Print Net CFG Wlan DefaultFrame type Reset Network Netware ProtocolSizes and Capacities Using Print MaterialsChoosing Paper and Other Materials Guidelines for Paper and Special MaterialsUsing Tray1 Using the Optional TrayUsing the Multi-purpose Tray Using the Manual Feed Printing on Special Print Materials Printing on EnvelopesLoad envelopes into the Multi-purpose Tray only Printing on Labels Printing on Preprinted PaperPrinting on Card Stock or Custom- sized Materials Basic Printing Canceling a Print JobPrinting a Document Canceling a Print Job Printing a DocumentIf you have an CLP-600 Printing a ConfigurationMaintaining Your Printer If you have an CLP-600NToner Cartridge Storage Replacing SuppliesManaging Toner Cartridges Toner Cartridge Life ExpectancyMaintaining Your Printer Replacing Toner Cartridges Replacing the Paper Transfer Belt Turn the printer on Replacing the Fuser Unit Cleaning the Inside of the Printer Cleaning the PrinterCleaning the Outside of the Printer Do not touch the green surface, the OPC drum, on the frontTo access SyncThru Web Service Start a web browser, such as Internet Explorer from WindowsStatus Response Solving ProblemsTroubleshooting Checklist Line/Continue buttonSolving General Printing Problems Problem Possible Cause SolutionTo Normal or Select Download as Bit ImageAdvanced Options window DraftMessage CLP Location GoTo Clearing Paper JamsPaper Feed Area 600N only JamMulti-purpose Tray Inside the Printer Paper Exit Area Solving Problems Optional Tray2 Open the outer jam cover in Tray2 Solving Problems Solving Print Quality Problems Problem SolutionTips for Avoiding Paper Jams Toner smear Color or BlackBackground VerticalUnderstanding Display Messages Over Heat Error Fuser is abnormally Low Heat Error Fuser is abnormallyLow Persists, call for service Engine Fuser Printer Install Indicated colorLife span When the Replace Transfer Belt Soon Mode Ready Color CorrespondingPrint quality is not Optimal. When ‘Color Toner Empty’ Replace Tray1 Life span Contact a service Pick-rollerCommon Windows Problems Common Linux Problems Common Macintosh ProblemsProblem Possible Cause and Solution Using Cups N-up feature is achieved through postAm using BSD lpr Denied errorsConfiguring Network Parameters on the Control Panel Using Your Printer on a NetworkSetting Up a Network Connected Printer About Sharing the Printer on a NetworkConfiguring TCP/IP Printing a Network ConfigurationSetting Network Protocols Static AddressingDynamic Addressing BOOTP/DHCP Configuring IPX Frame TypesPress the Upper Level button Configuring the Wireless Network Restoring the Network ConfigurationRebooting the Network Interface Card 13Press the On Line/Continue button to return to ready modeRestoring the Wireless Configuration Hexadecimal AlphanumericBit WEP Digits Characters 26digits Installing Printer Options Precautions When Installing Printer OptionsInstalling a Network Interface Interface Card PackageInstalling Printer Options Installing Printer Options Paper Specifications SpecificationsPrinter Specifications OverviewGuidelines for Using Paper Supported Sizes of Paper10.2 Paper Input Capacity Paper SpecificationsPaper Output Capacity Printer and Paper Storage EnvironmentEnvelopes LabelsIndex Inside 6.8 outside 6.8 componentsSoftware section Contents Sharing the Printer Locally For a USB-connected Macintosh Installing Software for Local Printing Installing Printer Software in WindowsInstalling Printer Software Typical InstallationCustom Installation Select Custom installation. Click Next Select the components to be installed and click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Select the components you want to reinstall and click NextChanging the Software Language Removing Printer Software NextSelect your printer driver from the Name drop-down list Select Printers and Faxes Select your printer driver icon Printer SettingsLayout Tab OrientationPaper Tab SourceQuality Color ModeGraphics Tab Advanced OptionsExtras Tab About TabPrinter Tab Using a Favorite Setting Using HelpAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsPrinting on Both Sides of Paper NonePrinting a Reduced or Enlarged Document Fitting Your Document to a Selected Paper SizeCreating a Watermark Using WatermarksUsing an Existing Watermark Click OK and start printingEditing a Watermark Using OverlaysWhat is an Overlay? Deleting a WatermarkUsing a Page Overlay Deleting a Page Overlay If necessary, click Confirm Page Overlay WhenList box Click Delete Overlay Sharing the Printer Locally Setting Up a Host ComputerSetting Up a Client Computer Check the Share this printer boxUnderstanding Smart Panel Using Smart PanelOpening the Troubleshooting Guide Toner LevelUsing Onscreen Help Using Printer Settings UtilityChanging the Smart Panel Program Settings You can view Printer Settings Utility help on screenSupported OS Using Your Printer in LinuxSystem Requirements Recommended CapacitiesInstalling the Printer Driver Changing the Printer Connection Method Using the Configuration Tool Uninstalling the Printer DriverSelect Complete uninstall and then click Uninstall Changing Llpr Properties Install the Printer driver Using Your Printer with a MacintoshInstalling Software for Macintosh Uninstalling the Printer driverFor a USB-connected Macintosh Setting Up the PrinterFor a Network-connected Macintosh Select Socket/HP Jet Direct in Printer TypePrinting Changing Printer SettingsLayout Setting Printing a DocumentPrinting Multiple Pages on One Sheet of Paper Printer Features SettingResolutionQuality Paper TypeLanguage, change 10 Layout properties, set Windows 15 toner save 15 true-type optionPage Rev .0

Related manuals

Manual 8 pages 19.01 Kb