12Press the scroll button ( 
or 
) until you see the desired frame type and press the Enter button ( 
).
13Press the On Line/Continue button (
) to return to ready mode.
Restoring the Network Configuration
You can return the network configuration to its default settings.
1In ready mode, press the Menu button ( 
) until you see
“Network” on the bottom line of the display.
2Press the Enter button ( 
) to access the menu.
3 Press the scroll button (
or 
) until “Default Set” displays on the bottom line. Press the Enter button ( 
).
4Press the Enter button ( 
) to confirm the selection.
5Reboot the network interface card.
Rebooting the Network Interface Card
If you configured the “Netware” or “Config WLAN” menu option, the printer will not recognize your change.
In this case, you can simply reboot the network interface card without turning your printer off and back on.
1In ready mode, press the Menu button ( 
) until you see
“Network” on the bottom line of the display.
2Press the Enter button ( 
) to access the menu.
3 Press the scroll button (
or 
) until “Reset Network” displays on the bottom line. Press the Enter button ( 
).
4Press the Enter button ( 
).
The printer reboots the network interface card.
Configuring the Wireless Network
See the instructions supplied with the wireless network interface card you purchased.
You can easily configure the wireless network environments using the SetIP program in Windows. See the Wireless Network User's Guide.
To configure the wireless settings:
1In ready mode, press the Menu button (
) until you see “Network” on the bottom line of the display. Press the Enter button ( 
) to access the menu.
2Press the Enter button ( 
) when “Config Network” displays on the bottom line.
3Press the scroll button ( 
or 
) until “Yes” displays on the bottom line. Press the Enter button ( 
).
4Press the Upper Level button (
).
8.4
5Press the scroll button ( 
or 
) until “Config WLAN” displays on the bottom line. Press the Enter button ( 
).
6Press the scroll button ( 
or 
) until “Yes” displays on the bottom line. Press the Enter button ( 
).
You can configure the following items:
•SSID: When you select “Search List”, the wireless network card on your printer searches for wireless networks in the area and shows the results on the list. Select a network from the list. You cannot change “Operation Mode”, “Frequency Mode”, or “Channel”.
If you select “Custom”, you can configure the wireless settings according to your needs and enter a name of up to 32 letters for your “Custom” setting. “SSID” is case sensitive, so you need to change it carefully. Using the scroll buttons,
find the letter you want and press the Enter button ( 
). When the cursor moves to the next input field, enter the following letters the same way you entered the first letter. After you have entered the last letter of the name, press the
Enter button ( 
) once again to save the ID. The way to enter the key number for the encryption key is the same as to enter letters.
•Operation Mode:
If your network uses an Access Point, you must reconfigure the operation mode to “Infra”. “Infra” mode allows both wireless and cabled computers to send files to the printer through an Access Point.
•Frequency Mode: “802.11a”, “802.11b/g”, or “802.11a/b/ g”.
The Samsung print server can be configured to operate in the following frequency modes:
-802.11a mode: The radio uses IEEE802.11a standard(5GHz).
-802.11b/g mode: The radio uses the frequency range defined in IEEE802.11g standard(2.4GHz). This mode is compatible with IEEE802.11b standard.
-802.11a/b/g mode: The radio uses the frequency range defined in IEEE802.11a and IEEE802.11b/g standard(5GHz and 2.4GHz).
The default setting is “802.11a/b/g”.
•Channel: This option is available in the
Using Your Printer on a Network