Samsung 920WM manual Do not use a damaged or loose plug

Page 3
Do not use a damaged or loose plug.

Do not use a damaged or loose plug.

zThis may cause electric shock or fire.

Do not pull the plug out by the wire nor touch the plug with wet hands.

zThis may cause electric shock or fire.

Use only a properly grounded plug and receptacle.

zAn improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

Insert the power plug firmly so that it does not come loose.

zA bad connection may cause fire.

Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.

zThis may cause electric shock or fire.

Do not connect too many extension cords or plugs to one outlet.

zThis may cause fire.

Use only a properly grounded plug and receptacle. Do not disconnect the power cord while using the monitor.

zA surge may be caused by the separation and may damage the monitor.

Insert the power plug firmly so that it does not come loose. Do not use the power cord when the connector or plug is dusty.

zIf the connector or plug of the power cord is dusty, clean it with a dry cloth.

zUsing the power cord with a dusty plug or connector may cause electric shock or fire.

Do not connect too many extension cords or plugs to one outlet. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

zThis may cause electric shock or fire.

Image 3
Contents SyncMaster 920WM Install driversNotational PowerDo not use a damaged or loose plug Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Do not use the power cord when the connector or plug is dustyDo not place the product on the floor InstallationDo not drop the monitor when moving it Do not place the product on an unstable or small surface areaPut down the monitor carefully CleanKeep any heating devices away from the power cable Installing a wall bracket must be done by a qualified professionalUse the recommended detergent with a smooth cloth Make sure to unplug the power cord before cleaning the productOthers Do not spray water or detergent directly onto the monitorDo not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openings Keep the volume at a comfortable level when using the headphonesGood Postures When Using the Monitor Try to maintain a good posture when using the monitorconnected to other devices, are disconnected before moving the monitor PRODUCT INFORMATION Image Retention Free WarrantyWhat is Image retention ? Power Off, Screen Saver, or Power Save ModeTo prevent this, the accumulated voltage difference must be decreased Please make sure the following items are included with your monitor Unpacking Without stand Monitor With stand Monitor & Simple StandManual Users Guide Warranty Card/ RegistrationQuick Setup Guide Power Cord2 Text Adjust buttons Enter button SOURCE buttonAUTO button AUTO Power button Power indicator RearDVI IN HDCP port POWER portFor using a locking device, contact where you purchase it RGB IN portConnecting the Monitor RGB INDVI IN HDCP Attaching a Base Using the Stand Monitor AssemblyInstalling the Monitor Driver Automatic z Please use Wall Mount according to the International standards2. Click Windows Microsoft Windows Vista Operating System Installing the Monitor Driver Manual3. Click Personalization and then Display Settings Click Advanced Settings…The certified driver will be posted on Samsung Monitor homepage Microsoft Windows XP Operating System 3. Click Display icon and choose the Settings tab then click Advanced 9. Click the Close button then click OK button continually Microsoft Windows Millennium Operating System How to install 1. Click Start , Setting , Control Panel1. Click Start , Setting , Control Panel Microsoft Windows 2000 Operating SystemLinux Operating System 4. AUTO AUTOWhen pressing the AUTO button after locking the OSD OSD Lock & UnlockAUTO adjust the brightness and contrast, and adjust MagicBright When pressing the MENU button after locking the OSDOSD Lock & Unlock Though the OSD adjustment lock function is activated, you can stillmodes VolumeMagicBright Push the MagicBright button to circle through available preconfiguredPicture SetupPicture SOURCEMENU→ → , → → , → MENU ColorBrightness Contrast MENU→ → → , → MENUCoarse Fine ImageColor Tone Color Control Gamma Cool Normal WarmV-Position Sharpness H-Position V-PositionLanguage H-PositionInformation SetupImage Reset Color ResetInformation Shows a video source, display mode on the OSD screenMENU → , → MENU Can you see Check Signal Cable on the screen? Connected using the D-sub cableCheck List Hz, a Not Optimum Control Panel → Display → Settings Q & ACheck the following items if there is trouble with the monitor Environment Self-Test Feature CheckSelf-Test Feature Check Warning Messagesz Judging the monitors working condition Useful TipsGeneral PowerSaver Table 1. Preset Timing Modes Preset Timing ModesEurope Contact SAMSUNG WORLDWIDENorth America Latin AmericaAsia Pacific Dot Pitch ResolutionTerms For Better DisplayAuthority Waste Electrical & Electronic Equipment - Europe only Correct Disposal of This Product