Samsung 920WM manual PowerSaver

Page 42
PowerSaver

453.6 X 318.65 X 61.6 mm / 17.9 x 12.5 x 2.4 inch (Without Stand)

453.6 X 376.5 X 207.8 mm / 17.9 x 14.8 x 8.2 inch (With Stand) / 4.3 kg / 9.5 lbs

VESA Mounting Interface

75 mm x 75 mm (For use with Specialty(Arm) Mounting hardware.)

Max internal speaker

1 W

Environmental considerations

Operating

Temperature : 50 °F~104 °F (10 ~ 40 )

 

Humidity : 20% ~ 80%, non-condensing

Storage

Temperature : -4 °F~140 °F (-20 ~ 60 )

 

Humidity: 10 % ~ 80 %, non-condensing

Plug and Play Capability

This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and computer systems will provide the best operating conditions and monitor settings. In most cases, monitor installation will proceed automatically, unless the user wishes to select alternate settings.

Dot Acceptable

TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it without uneasiness.

zFor example, the number of TFT LCD sub pixels that is contained in this product are 3,888,000.

Note: Design and specifications are subject to change without prior notice.

Class B Equipment (Information Communication equipment for residential use)

This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in all areas including common residential areas.

(Class B equipment emits less electromagnetic waves than Class A equipment.)

PowerSaver

This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPM compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature.

 

 

 

Power off

State

Normal Operation

Power saving mode

(Power button OFF)

 

 

 

EPA/ENERGY 2000

Power Indicator

Blue

Blue blinking

Off

Power Consumption

Less than 42 watts

Less than

Less than

1 watts

1 watts

 

 

This monitor is EPA ENERGY STAR® compliant and ENERGY2000 compliant when used with a computer equipped with VESA DPM functionality.

As an ENERGY STAR® Partner, SAMSUNG has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Image 42
Contents Install drivers SyncMaster 920WMPower NotationalDo not use the power cord when the connector or plug is dusty Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Do not use a damaged or loose plugDo not place the product on an unstable or small surface area InstallationDo not drop the monitor when moving it Do not place the product on the floorInstalling a wall bracket must be done by a qualified professional CleanKeep any heating devices away from the power cable Put down the monitor carefullyDo not spray water or detergent directly onto the monitor Make sure to unplug the power cord before cleaning the productOthers Use the recommended detergent with a smooth clothDo not cover the vents on the monitor cabinet Keep the volume at a comfortable level when using the headphones Never insert anything metallic into the monitor openingsGood Postures When Using the Monitor Try to maintain a good posture when using the monitorconnected to other devices, are disconnected before moving the monitor Power Off, Screen Saver, or Power Save Mode WarrantyWhat is Image retention ? PRODUCT INFORMATION Image Retention FreeTo prevent this, the accumulated voltage difference must be decreased Please make sure the following items are included with your monitor Unpacking Without stand Monitor With stand Monitor & Simple StandManual Power Cord Warranty Card/ RegistrationQuick Setup Guide Users GuideRear Adjust buttons Enter button SOURCE buttonAUTO button AUTO Power button Power indicator 2 TextRGB IN port POWER portFor using a locking device, contact where you purchase it DVI IN HDCP portConnecting the Monitor RGB INDVI IN HDCP Using the Stand Monitor Assembly Attaching a BaseInstalling the Monitor Driver Automatic z Please use Wall Mount according to the International standards2. Click Windows Click Advanced Settings… Installing the Monitor Driver Manual3. Click Personalization and then Display Settings Microsoft Windows Vista Operating SystemThe certified driver will be posted on Samsung Monitor homepage Microsoft Windows XP Operating System 3. Click Display icon and choose the Settings tab then click Advanced 9. Click the Close button then click OK button continually Microsoft Windows 2000 Operating System How to install 1. Click Start , Setting , Control Panel1. Click Start , Setting , Control Panel Microsoft Windows Millennium Operating SystemLinux Operating System AUTO 4. AUTOWhen pressing the AUTO button after locking the OSD OSD Lock & UnlockAUTO Though the OSD adjustment lock function is activated, you can still When pressing the MENU button after locking the OSDOSD Lock & Unlock adjust the brightness and contrast, and adjust MagicBrightPush the MagicBright button to circle through available preconfigured VolumeMagicBright modesSOURCE SetupPicture PictureMENU→ → → , → MENU ColorBrightness Contrast MENU→ → , → → , → MENUCool Normal Warm ImageColor Tone Color Control Gamma Coarse FineH-Position Sharpness H-Position V-PositionLanguage V-PositionColor Reset SetupImage Reset InformationInformation Shows a video source, display mode on the OSD screenMENU → , → MENU Can you see Check Signal Cable on the screen? Connected using the D-sub cableCheck List Hz, a Not Optimum Control Panel → Display → Settings Q & ACheck the following items if there is trouble with the monitor Warning Messages Self-Test Feature CheckSelf-Test Feature Check EnvironmentUseful Tips z Judging the monitors working conditionGeneral PowerSaver Preset Timing Modes Table 1. Preset Timing ModesLatin America Contact SAMSUNG WORLDWIDENorth America EuropeAsia Pacific For Better Display ResolutionTerms Dot PitchAuthority Correct Disposal of This Product Waste Electrical & Electronic Equipment - Europe only