Samsung 920WM manual Preset Timing Modes

Page 43
Preset Timing Modes

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.

Table 1. Preset Timing Modes

 

 

 

 

Horizontal

Vertical

Pixel Clock

Sync Polarity

Display Mode

Frequency

Frequency

(MHz)

(H/V)

 

(kHz)

(Hz)

 

 

 

IBM. 640 x 350

31.469

70.086

25.175

+/-

IBM. 640 x 480

31.469

59.940

25.175

-/-

IBM. 720 x 400

31.469

70.087

28.322

-/+

MAC. 640 x 480

35.000

66.667

30.240

-/-

MAC. 832 x 624

49.726

74.551

57.284

-/-

MAC. 1152 x 870

68.681

75.062

100.000

-/-

VESA. 640 x 480

31.469

59.940

25.175

-/-

VESA. 640 x 480

37.861

72.809

31.500

-/-

VESA. 640 x 480

37.500

75.000

31.500

-/-

VESA. 800 x 600

35.156

56.250

36.000

+/+

VESA. 800 x 600

37.879

60.317

40.000

+/+

VESA. 800 x 600

48.077

72.188

50.000

+/+

VESA. 800 x 600

46.875

75.000

49.500

+/+

VESA. 1024 x 768

48.363

60.004

65.000

-/-

VESA. 1024 x 768

56.476

70.069

75.000

-/-

VESA. 1024 x 768

60.023

75.029

78.750

+/+

VESA. 1152 x 864

67.500

75.000

108.000

+/+

VESA.1280 x 960

60.000

60.000

108.000

+/+

VESA.1280 x 1024

79.976

75.025

135.000

+/+

VESA. 1440 x 900

55.935

59.887

106.500

-/+

Horizontal Frequency

The time to scan one line connecting the right edge to the left edge of the screen horizontally is called Horizontal Cycle and the inverse number of the Horizontal Cycle is called Horizontal Frequency. Unit: kHz

Vertical Frequency

Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit: Hz

Page 42 Page 44
Image 43
Page 42 Page 44
Contents SyncMaster 920WM Install driversNotational PowerDo not use a damaged or loose plug Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Do not use the power cord when the connector or plug is dustyDo not place the product on the floor InstallationDo not drop the monitor when moving it Do not place the product on an unstable or small surface areaPut down the monitor carefully CleanKeep any heating devices away from the power cable Installing a wall bracket must be done by a qualified professionalUse the recommended detergent with a smooth cloth Make sure to unplug the power cord before cleaning the productOthers Do not spray water or detergent directly onto the monitorDo not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openings Keep the volume at a comfortable level when using the headphonesTry to maintain a good posture when using the monitor Good Postures When Using the Monitorconnected to other devices, are disconnected before moving the monitor PRODUCT INFORMATION Image Retention Free WarrantyWhat is Image retention ? Power Off, Screen Saver, or Power Save ModeTo prevent this, the accumulated voltage difference must be decreased Unpacking Without stand Monitor With stand Monitor & Simple Stand Please make sure the following items are included with your monitorManual Users Guide Warranty Card/ RegistrationQuick Setup Guide Power Cord2 Text Adjust buttons Enter button SOURCE buttonAUTO button AUTO Power button Power indicator RearDVI IN HDCP port POWER portFor using a locking device, contact where you purchase it RGB IN portRGB IN Connecting the MonitorDVI IN HDCP Attaching a Base Using the Stand Monitor Assemblyz Please use Wall Mount according to the International standards Installing the Monitor Driver Automatic2. Click Windows Microsoft Windows Vista Operating System Installing the Monitor Driver Manual3. Click Personalization and then Display Settings Click Advanced Settings…The certified driver will be posted on Samsung Monitor homepage Microsoft Windows XP Operating System 3. Click Display icon and choose the Settings tab then click Advanced 9. Click the Close button then click OK button continually Microsoft Windows Millennium Operating System How to install 1. Click Start , Setting , Control Panel1. Click Start , Setting , Control Panel Microsoft Windows 2000 Operating SystemLinux Operating System 4. AUTO AUTOOSD Lock & Unlock When pressing the AUTO button after locking the OSDAUTO adjust the brightness and contrast, and adjust MagicBright When pressing the MENU button after locking the OSDOSD Lock & Unlock Though the OSD adjustment lock function is activated, you can stillmodes VolumeMagicBright Push the MagicBright button to circle through available preconfiguredPicture SetupPicture SOURCEMENU→ → , → → , → MENU ColorBrightness Contrast MENU→ → → , → MENUCoarse Fine ImageColor Tone Color Control Gamma Cool Normal WarmV-Position Sharpness H-Position V-PositionLanguage H-PositionInformation SetupImage Reset Color ResetShows a video source, display mode on the OSD screen InformationMENU → , → MENU Connected using the D-sub cable Can you see Check Signal Cable on the screen?Check List Hz, a Not Optimum Q & A Control Panel → Display → SettingsCheck the following items if there is trouble with the monitor Environment Self-Test Feature CheckSelf-Test Feature Check Warning Messagesz Judging the monitors working condition Useful TipsGeneral PowerSaver Table 1. Preset Timing Modes Preset Timing ModesEurope Contact SAMSUNG WORLDWIDENorth America Latin AmericaAsia Pacific Dot Pitch ResolutionTerms For Better DisplayAuthority Waste Electrical & Electronic Equipment - Europe only Correct Disposal of This Product
Top Page Image Contents