Samsung 920WM manual Hz, a Not Optimum

Page 37
Hz, a "Not Optimum

There is no image on the screen.

Is the power indicator on the monitor blinking at 1 second intervals?

Connected using the DVI cable?

Hz, a "Not Optimum

Mode","Recommended mode 1440 x 900 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum

Mode","Recommended Mode 1440 x 900 60 Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

The monitor is in PowerSaver mode.

press a key on the keyboard to activate the monitor and restore the image on the screen.

If there is still no image, press the 'Manual background' button.

Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals.

Connect the DVI cable and then reboot the system.

I cannot see the On Screen Display.

The screen shows strange colors or just black and white.

Have you locked the On Screen Display (OSD) Menu to prevent changes?

Is the screen displaying only one color as if looking at the screen through a cellophane paper?

Have the screen colors become strange after running a program or due to a crash between applications?

Unlock the OSD by pressing the [MENU / Manual background] button for at least 5 seconds.

Check the signal cable connection.Make sure the video card is fully inserted in it's slot.

Reboot the computer.

The screen suddenly has become unbalanced.

Has the video card been set properly?

Have you changed the video card or the driver?

Have you adjusted the resolution or frequency to the monitor?

Set the video card by referring to the video card manual.

Adjust screen image position and size using the OSD.

Adjust the resolution and frequency at the video card.

(Refer to the Preset Timing Modes).

The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

The screen is out of focus or OSD cannot be adjusted.

LED is blinking but no images on the screen.

Have you adjusted the resolution or frequency on the monitor?

Is the frequency properly adjusted when checking the Display Timing on the menu?

Adjust the resolution and frequency of the video card.

(Refer to the Preset Timing Modes).

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.

(The maximum frequency per resolution may differ from product to

Page 36 Page 38
Image 37
Page 36 Page 38
Contents SyncMaster 920WM Install driversNotational PowerDo not disconnect the power cord while using the monitor Insert the power plug firmly so that it does not come looseDo not use the power cord when the connector or plug is dusty Do not use a damaged or loose plugDo not drop the monitor when moving it InstallationDo not place the product on an unstable or small surface area Do not place the product on the floorKeep any heating devices away from the power cable CleanInstalling a wall bracket must be done by a qualified professional Put down the monitor carefullyOthers Make sure to unplug the power cord before cleaning the productDo not spray water or detergent directly onto the monitor Use the recommended detergent with a smooth clothDo not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openings Keep the volume at a comfortable level when using the headphonesTry to maintain a good posture when using the monitor Good Postures When Using the Monitorconnected to other devices, are disconnected before moving the monitor What is Image retention ? WarrantyPower Off, Screen Saver, or Power Save Mode PRODUCT INFORMATION Image Retention FreeTo prevent this, the accumulated voltage difference must be decreased Unpacking Without stand Monitor With stand Monitor & Simple Stand Please make sure the following items are included with your monitorManual Quick Setup Guide Warranty Card/ RegistrationPower Cord Users GuideAUTO button AUTO Power button Power indicator Adjust buttons Enter button SOURCE buttonRear 2 TextFor using a locking device, contact where you purchase it POWER portRGB IN port DVI IN HDCP portRGB IN Connecting the MonitorDVI IN HDCP Attaching a Base Using the Stand Monitor Assemblyz Please use Wall Mount according to the International standards Installing the Monitor Driver Automatic2. Click Windows 3. Click Personalization and then Display Settings Installing the Monitor Driver ManualClick Advanced Settings… Microsoft Windows Vista Operating SystemThe certified driver will be posted on Samsung Monitor homepage Microsoft Windows XP Operating System 3. Click Display icon and choose the Settings tab then click Advanced 9. Click the Close button then click OK button continually 1. Click Start , Setting , Control Panel How to install 1. Click Start , Setting , Control PanelMicrosoft Windows 2000 Operating System Microsoft Windows Millennium Operating SystemLinux Operating System 4. AUTO AUTOOSD Lock & Unlock When pressing the AUTO button after locking the OSDAUTO OSD Lock & Unlock When pressing the MENU button after locking the OSDThough the OSD adjustment lock function is activated, you can still adjust the brightness and contrast, and adjust MagicBrightMagicBright VolumePush the MagicBright button to circle through available preconfigured modesPicture SetupSOURCE PictureBrightness Contrast ColorMENU→ → → , → MENU MENU→ → , → → , → MENUColor Tone Color Control Gamma ImageCool Normal Warm Coarse FineLanguage Sharpness H-Position V-PositionH-Position V-PositionImage Reset SetupColor Reset InformationShows a video source, display mode on the OSD screen InformationMENU → , → MENU Connected using the D-sub cable Can you see Check Signal Cable on the screen?Check List Hz, a Not Optimum Q & A Control Panel → Display → SettingsCheck the following items if there is trouble with the monitor Self-Test Feature Check Self-Test Feature CheckWarning Messages Environmentz Judging the monitors working condition Useful TipsGeneral PowerSaver Table 1. Preset Timing Modes Preset Timing ModesNorth America Contact SAMSUNG WORLDWIDELatin America EuropeAsia Pacific Terms ResolutionFor Better Display Dot PitchAuthority Waste Electrical & Electronic Equipment - Europe only Correct Disposal of This Product
Top Page Image Contents