Samsung 900IFT manual Preface Safety Information

Page 4

SE-900IFT-E 4/29/92 5:23 PM Page 2

Preface: Safety Information

Please read and follow these instructions when connecting and using your computer monitor.

1

Before connecting the AC power

cord to an outlet, make sure the

 

voltage designation on your monitor

 

corresponds to the local electrical

 

supply.

2

Never insert anything metallic into

the monitor openings. Doing so may

 

create the danger of electric shock.

3

To avoid electric shock, never

touch the inside of the monitor.

 

Only a qualified technician should

 

open the monitor’s case.

4

Never use your monitor if the power

cord has been damaged. Do not

 

allow anything to rest on the power

 

cord, and keep the cord away from

 

where people could trip over it.

5

Be sure to hold the plug, not the

cord, when disconnecting the

 

monitor from an electric socket.

6

Openings in the monitor cabinet are

provided for ventilation. To prevent

 

overheating, these openings should

 

not be blocked or covered. Also,

 

avoid using the monitor on a bed,

 

sofa, rug, or other soft surface.

 

Doing so may block the ventilation

 

openings in the bottom of the

 

cabinet. If you put the monitor in a

 

bookcase or some other enclosed

 

space, be sure to provide adequate

 

ventilation.

7

Put your monitor in a location with

low humidity and a minimum of

dust. Avoid places like damp basements or dusty hallways.

8

Do not expose the monitor to rain or

use it near water (In kitchens, next

 

to swimming pools, etc.). If the

 

monitor accidentally gets wet,

 

unplug it and contact an authorized

 

dealer immediately. You can clean

 

the monitor with a damp cloth when

 

necessary, but be sure to unplug

 

the monitor first.

9

Place the monitor on a solid surface

and treat it carefully. The screen is

made of glass and can be damaged if dropped or sharply hit.

10Locate your monitor near an easily accessible AC outlet.

11If your monitor does not operate normally – in particular, if there are any unusual sounds or smells coming from it – unplug it immediately and contact an authorized dealer or service center.

12High temperatures can cause problems. Don’t use your monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.

13Unplug the monitor when it is going to be left unused for an extended period of time.

14Unplug your monitor from the AC outlet before any service.

15This product has adopted the newly developed DynaFlat CDT (Color Display Tube) with a surface treated with High contrast Multi - Layer Film for a high quality images. Never use sharp, rough or metallic substances to clean the screen.

2

Image 4
Contents SyncMaster 900IFT Unpacking your Monitor Table of Contents Preface Safety Information Power indicator Power buttonChapter One Overview of Your Monitor ButtonPower port Connect the power cord hereSignal port Connect your signal cable hereConnecting Your Monitor Chapter Two InstallationTo a Computer Chapter Three Adjusting Your Monitor OverviewMenu Previous menu levelDirect-Access Features Button twiceChange the horizontal size of the monitor’s display PositionAdjust the trapezoid setting Rotation settingPincushion/Trapezoid Parallel/RotationMenu Features Degaussing screen will appear ReturnScreen Push the $ button to select YES Button to select noPush Button to open the menu position Adjustment screen Seconds seconds is the default valuePosition you prefer Screen Use the $ button or % button to select BNC or SUBUntil the moiré effect is cleared SettingYou would like to use You cannot select a new setting Is displayedFactory timings Level screen is displayed$ button or % button until the Sync. Input Type Push Button to open the sync input type Selection screenSync. On Green Push the Menu buttonPowerSaver Troubleshooting Adjust the Brightness or Contrast settingsAdjust the Size settings Activate the Degauss featureSpecifications AppendixSUB Connectors Pin AssignmentsDisplay Modes Timing Chart BNC ConnectorsSignals Display Mode Horizontal Vertical Pixel Sync PolarityIndex Regulatory Information FCC InformationIC Compliance Notice MPR II ComplianceCode NO. BH68-00031A Rev SyncMaster 900IFT Owner’s Instructions