Alignment & Adjustments
6.3.2 In the Paper Exit Area
1 Open and close the front cover. The jammed paper is automatically ejected from the machine. If the paper is not ejected continue to step 2.
2 Gently pull the paper out of the front output tray. Skip to step 9.
If you cannot see the jammed paper in the front output tray, continue to step 3.
3 Open the jam cover by lifting the front edge of the scanner unit. The support lever will automatically pop up.
6 Open the rear cover.
7 Remove the jammed paper by gently pulling it straight out.
8 Close the rear cover.
9 Open and close the front cover to resume printing.
4 Pull the paper out gently.
5 Close the jam cover by pushing the support tab to the left and hold it down whilst lowering the cover carefully until the cover fully down, this will hold down the tab.
If there is any resistance and the paper does not move when you pull or if you cannot see the paper in the jam cover, continue to step 6.
Service Manual
Samsung Electronics