Universal Remote Control OCE-0085A, URC-WR7 manual Arrow Down, Auto-Search Method

Auto-Search Method

The Auto-Search Method is a way you can scan through all of the codes in the table to find the right code for your component.

STEP 1: Manually or using your old remote, turn on the component you want to pro- gram—for example, to program your TV, turn on your TV set.

STEP 2: On the WR7, press the Component button that you want to program (in this case the button that says TV) and the SELECT [SEL] button at the same time. Hold down both buttons for two seconds until the TV Component button light turns on. This sig- nals that you are in programming mode.

IMPORTANT: You have 30 seconds to per- form the next step while you are in program- ming mode. If you do not press a button within 30 seconds, the component LED light will turn off. The remote will exit the pro- gramming mode and you will have to start over.

UP

ARROW

DOWN

ARROW

Page 14